|
| | |
|
|
cpaine0106
User
Jun 24, 2009, 1:43 PM
Post #1 of 6
(1906 views)
|
I'm working on a 1998 volkswaken bettle with a 2.0L with 103K miles. The engine will idle fine after a brief warm-up, but will stumble and nearly die when the gas pedal is depressed. The engine runs fine when the fuel return line is pinched off with a pair of pliers, just after the regulator, leading me to believe there is a lean condition. The fuel pump, filter, and pressure regulator are all brand new. The pressure reading matches spec with no bleed off after ten minutes. I have misfire codes for cylinders 1, 2, and 3, as well as a random misfire code. There is also a downstream O2 sensor code. There is an exhaust leak before the catalytic converter. I have never seen an exhaust leak or bad O2 sensor cause an engine to run so poorly. If anyone has come across anything similar, or have any thoughts on the subject, any help would be much appreciated.
P.S. An update on me for anyone concerned: I'm no longer "Mr. Goodwrench." I am now working for Nissan North America.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 24, 2009, 10:12 PM
Post #2 of 6
(1899 views)
|
My first suspicions would be with the Mass Air Flow sensor. I'm not sure if VW will default if the sensor is unplugged but it may be worth a try.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
cpaine0106
User
Jun 25, 2009, 9:22 AM
Post #3 of 6
(1892 views)
|
I'll check the MAF sensor and see what happens. Another suspicion is the Throttle position sensor. Any thoughts?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 25, 2009, 9:49 AM
Post #4 of 6
(1889 views)
|
The TPS is possible but not real likely. It would have to go completely open circuit and the computer would pick up on that.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
cpaine0106
User
Jun 30, 2009, 11:06 AM
Post #5 of 6
(1868 views)
|
Turned out to be the MAF sensor. It does go into default when unplugged. Thanks for pointing me in the right direction.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 30, 2009, 11:07 AM
Post #6 of 6
(1865 views)
|
Glad I could help
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Strut spring orientation and strut mount tension nut
Please Help - Knock sound & engine fail
Brake Seals Bulging
