Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






1992 Nissan 240SX engine dying


Search for (search options)
 



DixieWriter
New User

Aug 19, 2005, 4:09 PM

Post #1 of 2 (2718 views)
1992 Nissan 240SX engine dying Sign In

I have an automatic. I don't even know for sure which section to post this in. I am about in tears. My Nissan began stopping about a month ago after I had an emissions test. I passed the emissions test with flying colors. I don't know if there's a connection or not, but the next day, the car began stopping when I would slow down to turn or come to a light. The past week or so, it has begun stopping while I was driving. The past few days, it has gotten sluggish in all gears and then would jerk when sliding into gear. I have had the TCP valve checked. I had the transmission flushed two days ago, but the car quit on me three times today. I've had two different places check the transmission; they swear it's fine. When the car stops, the dash lights come on for emissions, brakes, etc. I have been having a problem for several months with the ignition not turning on the first try or two sometimes, but I've had the battery and alternator checked, and those seem fine. The thermostat and radiator was replaced about 6 months ago. Other than that, the car is supposedly in "great shape" to the point that I've had offers made, but this stopping while I'm driving is dangerous. I don't know what else to check. Could it be the fuel pump or fuel filter? I really don't know what to do or where to turn. Thank you for any advice.


motorheadII
User

Aug 19, 2005, 4:41 PM

Post #2 of 2 (2712 views)
Re: 1992 Nissan 240SX engine dying Sign In

Your problem could be caused by too little fuel, but I'm inclined to think the ignition problem you mentioned is a clue. It's possible you have a worn out ig switch or poor connections in the harness. You'll need to access underdash wiring to inspect and test circuitry. A test light, DVOM, and wiring diagrams can also be useful. Gently bending and twisting wiring will sometimes help locate a problem.






 
 
 






Search for (options) Privacy Sitemap