|
|
coder1
Novice
Dec 21, 2007, 1:35 PM
Post #1 of 10
(3718 views)
|
1986 monte carlo (4.3)
|
Sign In
|
|
my car turns over very healthy but will not start. i have changed plugs, wires, cap, rotor, and coil. but she will not start. 
|
|
| |
|
|
Double J
Veteran
/ Moderator
Dec 21, 2007, 1:43 PM
Post #2 of 10
(3715 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
does it have spark? does it have fuel ?
if your chasing no spark,did you change the ignition module?i
does this have tbi or carburetor? can't remember
|
|
| |
|
|
coder1
Novice
Dec 21, 2007, 1:48 PM
Post #3 of 10
(3713 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
it starts if i take the coil wire off and hold it 1/4" away but as soon has i bring it closer than 1/4" it dies. im lost
|
|
| |
|
|
coder1
Novice
Dec 21, 2007, 1:50 PM
Post #4 of 10
(3711 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
and it is tbi and it does have gas. and no i have not changed the ignition mod.
|
|
| |
|
|
Double J
Veteran
/ Moderator
Dec 21, 2007, 1:58 PM
Post #5 of 10
(3706 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
using a grounding probe ,check,are the spark plug wires/coil wire arcing at the cap?
did you try a different coil wire?
|
|
| |
|
|
coder1
Novice
Dec 21, 2007, 2:32 PM
Post #6 of 10
(3705 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
tryed 3 sets of of wires
|
|
| |
|
|
coder1
Novice
Dec 21, 2007, 2:35 PM
Post #7 of 10
(3701 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
when i put a new coil in it it will start but next time same problem
|
|
| |
|
|
Double J
Veteran
/ Moderator
Dec 21, 2007, 2:44 PM
Post #8 of 10
(3699 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
duh,sorry ,just reread your post,see wires were replaced.....you know i've had this before and i'm drawing a blank...i'm assuming all parts replaced were new......reminds me of the german army during world war 2.
the commandant came in to the barracks and told the troops that they had to "change underwear today".
then told them that hans had to change with franz, wilhelm had to change with helmut,etc...lol....sorry...ok,back to the problem....i know that spark will take the easiest path.....have seen spark ground out thru the bottom of the rotor to the distr.shaft...but since all is new,only thing i can think of is the module...
|
|
| |
|
|
coder1
Novice
Dec 21, 2007, 2:47 PM
Post #9 of 10
(3698 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
ok thanks ill try that and let u guys know what happens.
|
|
| |
|
|
coder1
Novice
Dec 22, 2007, 5:39 PM
Post #10 of 10
(3688 views)
|
|
Re: 1986 monte carlo (4.3)
|
Sign In
|
|
i tryed new ignition mod and nothing. but what about timing, could it be off?
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Strut spring orientation and strut mount tension nut
Please Help - Knock sound & engine fail
Brake Seals Bulging
