|
|
dougc426
User
Apr 21, 2011, 6:10 PM
Post #1 of 33
(5739 views)
|
|
1972 Cadillac eldorado
|
Sign In
|
|
 I bought this car NOT running,Carb was wroung one so i got the correct one for it.Hooked up all vacuum lines,new plugs,wires,cap,rotor,uni-points,oil&filter.Carb was dyno-tested and run on a motor,The guy that rebuilds them has done carbs for me before all have been good.So get everything hooked up and i have power to coil but no spark out of the coil going to the cap,not many wires to hook up and i have a 1972 cadillac shop manual to help out.Now what do i look for to get this car running?...Help please
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 21, 2011, 6:37 PM
Post #2 of 33
(5732 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
Check for power at the red lead coming into the distributor.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dougc426
User
Apr 21, 2011, 6:39 PM
Post #3 of 33
(5728 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
I did,Power to coil,then when i turn the car over,I have spark to negitive side but still no spark to distributor,I put new coil in too.also checked out distributor wire tested out good???
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 21, 2011, 6:42 PM
Post #4 of 33
(5724 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
How did you determine that you have spark to negative side of the coil? Isn't this HEI with internal coil?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dougc426
User
Apr 21, 2011, 6:46 PM
Post #5 of 33
(5720 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
No its not a hei,I dont think HEI came out till 1973..thanks
|
|
| |
|
|
dougc426
User
Apr 21, 2011, 6:47 PM
Post #6 of 33
(5720 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
No its not a HEI,I dont think they came out till 1973??/...Thanks
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 21, 2011, 6:54 PM
Post #7 of 33
(5714 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
So it has points?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dougc426
User
Apr 21, 2011, 6:57 PM
Post #8 of 33
(5708 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
yes it does
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 21, 2011, 7:01 PM
Post #9 of 33
(5703 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
You should be getting a pulsing ground signal on the - side of the coil when cranking. If none found, change the points and condenser.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dougc426
User
Apr 21, 2011, 7:02 PM
Post #10 of 33
(5697 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
Ok,will do.the points are new but i know that dont mean squat..Thanks
|
|
| |
|
|
dougc426
User
Apr 22, 2011, 6:05 PM
Post #11 of 33
(5681 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
new points same results,still no spark from coil????
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 22, 2011, 6:19 PM
Post #12 of 33
(5677 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
Do you have pulse on the negative side when cranking?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dougc426
User
Apr 22, 2011, 6:54 PM
Post #13 of 33
(5671 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
looked to be steady no pulse...!!!!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 22, 2011, 6:56 PM
Post #14 of 33
(5668 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
Then you still have a problem in the points or distributor. That is what supplies the pulsing ground to fire the coil. Make sure the wire isn't shorted inside anywhere.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
re-tired
Veteran
/ Moderator
Apr 22, 2011, 8:10 PM
Post #15 of 33
(5662 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
YOU said you put in a set of uni points . make sure you mounted the wire to them correctly .Ive seen them grounded by mistake . also what did you gap points to . Have you tried getting a dwell meter to read ?
LIFE'S SHORT GO FISH
|
|
| |
|
|
dougc426
User
Apr 23, 2011, 7:23 AM
Post #16 of 33
(5641 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
How could you get the wire wroung?.Theres only one wire to hook(get it) up..I'm ready to go fishing as i have a house on the water in hernando beach florida..15 minutes to open gulf..thanks for your help...best
|
|
| |
|
|
dougc426
User
Apr 23, 2011, 7:24 AM
Post #17 of 33
(5640 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
also how can you ground them(the points) by mistake mistake??????
|
|
| |
|
|
re-tired
Veteran
/ Moderator
Apr 23, 2011, 7:33 AM
Post #18 of 33
(5638 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
The post has insulating washers on it .Is is possible but rare to get the wire behind the washers vs between them which will ground it. What about the point setting. Glad to help you TROLL for an answer.
LIFE'S SHORT GO FISH
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 23, 2011, 7:45 AM
Post #19 of 33
(5635 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
The wire is supposed to be making contact with the swinging arm and the related spring only. If it makes contact with the frame that is screwed down, it is shorted out. Also make sure your engine is grounded to the battery and frame.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Double J
Veteran
/ Moderator
Apr 23, 2011, 6:20 PM
Post #20 of 33
(5623 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
Saw a lot of guys install the wire in the wrong spot....
One thought i had too is ...had many uniset points come out of the box and not start the car.
Not just Delco Remy but others as well..
Assuming they're installed correctly as the others have mentioned..take an allen wrench,open the distributor cap window and while someone cranks the engine,try backing off on the points to see if it hits/starts.Had to to this many times,if so,then set the dwell with a dwell meter..
A lot of guys that didnt have a meter would dial the points in until the engine misfired and then back em off like 180 degrees..not the correct way ...
|
|
| |
|
|
dougc426
User
Apr 25, 2011, 7:05 PM
Post #21 of 33
(5604 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
Hey Guys,
Took distributor out and put new wire leed in.Car started right up,Purrs like a kitten.So want to thank you all for the help...Best...Doug
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 25, 2011, 7:10 PM
Post #22 of 33
(5601 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
Glad to hear it. it must have been contacting the housing somewhere.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dougc426
User
Apr 25, 2011, 7:21 PM
Post #23 of 33
(5595 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
SOMETIMES YOU CAN REALLY GET TEED OFF..bUT WHEN THEY ARE RUNNING RIGHT,YOU HAVE TO SMILLE!!!!!!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 25, 2011, 7:22 PM
Post #24 of 33
(5592 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
LOL, thanks for posting the solution
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dougc426
User
Apr 25, 2011, 7:24 PM
Post #25 of 33
(5589 views)
|
|
Re: 1972 Cadillac eldorado
|
Sign In
|
|
The end for the points in the cap was very loose,not making good contact,maybe this can help someone else out,trying to figure out how to poet picture of can on this web site
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Strut spring orientation and strut mount tension nut
Please Help - Knock sound & engine fail
Brake Seals Bulging
1
