|
|
Alan mills
Novice
Nov 29, 2015, 3:41 PM
Post #1 of 8
(1273 views)
|
My 2005 kia optima will run fine but some times the engine will cut back after starting or bog down when I push the gas. changed tps changed crankshaft sensor . sometimes it runs fine sometimes not . help
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 29, 2015, 3:45 PM
Post #2 of 8
(1271 views)
|
Which engine?
Why did you replace those items? Did you do any testing and found they were faulty?
Any trouble codes stored in the engine computer? If so, what are the numbers?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Nov 29, 2015, 3:46 PM)
|
|
| |
|
|
Alan mills
Novice
Nov 29, 2015, 3:55 PM
Post #3 of 8
(1265 views)
|
4cylinder and dunno about codes I'm afraid to take it any where and get stranded money is a big issue so trying fix it myself
|
|
| |
|
|
Alan mills
Novice
Nov 29, 2015, 4:00 PM
Post #4 of 8
(1259 views)
|
I'm guessing I need to take it to advance and get codes?
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 29, 2015, 4:08 PM
Post #5 of 8
(1253 views)
|
That would be a good start. If there are code(s) stored that might give you some direction if the code(s) are related to your symptoms.
Just giving you heads up, but intermittent drive-ability systems can be extremely difficult to figure out without test equipment and vehicle service information.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Alan mills
Novice
Nov 29, 2015, 4:11 PM
Post #6 of 8
(1250 views)
|
Also when its acting up It acts like its getting smothered out when I push accelerator and cuts off. It starts right back up and cuts off after a couple seconds. Any ideas???
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Nov 29, 2015, 4:34 PM
Post #7 of 8
(1240 views)
|
You should see if there are any codes first.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Alan mills
Novice
Nov 29, 2015, 4:38 PM
Post #8 of 8
(1238 views)
|
Ok I will take it tomorrow after work and post codes here. Thanks
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Strut spring orientation and strut mount tension nut
Please Help - Knock sound & engine fail
Brake Seals Bulging
