Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






Search Auto Parts

03 saturn L300 stals n wont start for 1/2 hour then runs fine for 1/ hour


  Email This Post



darrylsdiving
New User

Apr 2, 2013, 2:54 PM

Post #1 of 2 (986 views)
03 saturn L300 stals n wont start for 1/2 hour then runs fine for 1/ hour Sign In

i have a 03 saturn L300 3.0L 92000 miles it starts fine runs for 20/30 mins dies;wont start again for another 30/40 mins then suns fine for another 1/2 hour or soit has codes for crank sensor,tps sensor and engine speed sensor where do i start in repairs to the car i was also thinking it may b posible fuel pump isse??


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 2, 2013, 2:58 PM

Post #2 of 2 (976 views)
Re: 03 saturn L300 stals n wont start for 1/2 hour then runs fine for 1/ hour Sign In

  All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.



Every engine requires spark, fuel and compression to run. That's what we have to look for.

These are the basics that need to be tested and will give us the info required to isolate a cause.

1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.


2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.


3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.


Once you have determined which of these functions has dropped out,
you will know which system is having the problem.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap