1988 olds 88 with 3.8v6 codes 26,39,41,42 and 63...Car stalls..help

Gotta a lot of stuff goin on here. I'm not sure what type of equipment you have or your skill level but you're gonna need a good voltmeter & scanner that reads the data stream & has bi-directional controls minium for this one.


(This post was edited by Sidom on Aug 18, 2009, 3:56 PM)

cracka;
26=Quad driver module error
39=TCC (torque convertor circuit)
41=Cam Sensor circuit
42=EST Circuit
63=EGR Circuit
All of these could be related. This is going to sound like a crazy question, but do the brake lights work? If so, pin voltage testing is going to be required to find the problem. Could be a broken wire, poor ground, bent or damaged ECM pins, ect. If the brake lights don't work, address that first.
Loren
SW WA