|
|
|
door locks and power seat
|
|
|
| |
|
|
harry.480
Novice
Aug 27, 2008, 7:10 AM
Post #1 of 8
(1547 views)
|
|
door locks and power seat
|
Sign In
|
|
My door locks and power drivers seat works off and on. Check for power on door switch none.
|
|
| |
|
|
Jeff Norfolk
Enthusiast
Aug 27, 2008, 12:52 PM
Post #2 of 8
(1540 views)
|
|
Re: door locks and power seat
|
Sign In
|
|
What year, make, and model is this. Be glad to help with the problem, but will need this info. Thanks
Jeff
|
|
| |
|
|
Double J
Veteran
/ Moderator
Aug 27, 2008, 12:52 PM
Post #3 of 8
(1540 views)
|
|
Re: door locks and power seat
|
Sign In
|
|
What kind of vehicle is this?
Year,make,model,engine size..
There may breaks/opens in the wiring that comes to the drivers door thru the pass thru conduit in the door opening ...
Jim
|
|
| |
|
|
harry.480
Novice
Aug 28, 2008, 8:04 AM
Post #4 of 8
(1531 views)
|
|
Re: door locks and power seat
|
Sign In
|
|
My car is a 1997 Jimmy. Thanks
|
|
| |
|
|
Jeff Norfolk
Enthusiast
Aug 28, 2008, 1:33 PM
Post #5 of 8
(1525 views)
|
|
Re: door locks and power seat
|
Sign In
|
|
Both the locks and the power seats share a 20 amp circute braker. This is likely the problem. It is located in the instament panel fuse box. Very inexpensive. Replace and check back. Good luck
Jeff
|
|
| |
|
|
harry.480
Novice
Aug 31, 2008, 7:03 AM
Post #6 of 8
(1502 views)
|
|
Re: door locks and power seat
|
Sign In
|
|
Jeff Looked at wiring threw both doors no breaks and change breaker no luck. harry.480
|
|
| |
|
|
Jeff Norfolk
Enthusiast
Aug 31, 2008, 4:27 PM
Post #7 of 8
(1494 views)
|
|
Re: door locks and power seat
|
Sign In
|
|
The breaker is the only thing that the power seats and the door locks have in common. Unless there are two separate problems, than this is the place to focus you attention. You said that there is no power at the lock switches, there should be at the switch at all times. The orange wire will be constant power. If the breaker is new than there is probably a break in the wire somewhere. Even though you can not see the break, it may still be there. You will have to either ohm the wire from breaker to switch to find break, or test the wire for power every few inches from the breaker to the switch.
Jeff
|
|
| |
|
|
harry.480
Novice
Sep 13, 2008, 10:17 AM
Post #8 of 8
(1470 views)
|
|
Re: door locks and power seat
|
Sign In
|
|
Jeff Checked for breaks from breaker to seat switch with ohm meter found nothing but when I took out the new breaker it was very hot. What I think might be happening is something getting the breaker hot causing the seat and door lock switch not to work. Anyway I unpluged the autuation module to see if the breaker will heat up. The seat switch works and all the door locks work except the drivers door. Naturualy the keyless entry is not working . Harry.480
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Rear brake retaining clips
Car idles funny but doesn't throw codes
Sanded rotors (deep scratches)
Car stalling problem
