|
|
lbholt
New User
Oct 28, 2006, 10:26 AM
Post #1 of 6
(3081 views)
|
I have a 1986 Chevy GMC,motor size 350.I have replaced plugs,wires,rotor,cap,module,and coil.When I start up the coil
archs and takes the module out.Can anyone help me figure out
what I should do to fix this problem? Thanks,Larry
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Oct 28, 2006, 10:47 AM
Post #2 of 6
(3078 views)
|
|
Re: coil is arching
|
Sign In
|
|
Not sure how you figured that out with the coil in the cap but probably would just replace it and the cap and rotor, T OOPS - somehow didn't see that you had replaced cap and rotor
(This post was edited by Tom Greenleaf on Oct 29, 2006, 11:06 AM)
|
|
| |
|
|
lbholt
New User
Oct 28, 2006, 10:51 AM
Post #3 of 6
(3077 views)
|
|
Re: coil is arching
|
Sign In
|
|
Tried that 4 times,and still same thing.Thanks for your reply.
Larry
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Oct 28, 2006, 12:41 PM
Post #4 of 6
(3076 views)
|
|
Re: coil is arching
|
Sign In
|
|
From here I would check the distrutor's shaft bearings. I'ts never happened to me on the HEI but if it can wobble around a lot it might be able to make erratic sparks. I haven't found a local rebuilder for one I need done in a 1948 tractor and haven't asked yet if I can just get one rebuilt.
For the Chev HEI they probably aren' t that expensive anymore. Good luck, T
(This post was edited by Tom Greenleaf on Oct 28, 2006, 12:54 PM)
|
|
| |
|
|
way2old
Veteran
/ Moderator
Oct 28, 2006, 4:24 PM
Post #5 of 6
(3073 views)
|
|
Re: coil is arching
|
Sign In
|
|
Is the grounding rang still in the cap? Sounds like the system is looking for a ground and is grounding through the shaft.
Being way2old is why I need help from younger minds
|
|
| |
|
|
steve01832
Veteran
Oct 29, 2006, 6:17 AM
Post #6 of 6
(3070 views)
|
|
Re: coil is arching
|
Sign In
|
|
Sounds like way2old hit the nail on the head. When you remove the coil, there should be a round rubber gasket with a metal rod and spring under it. If it is there replace the rubber gasket. Also, there should be a ground clip under the coil that plugs into the connector at the distributor. If it is gone, replace that also. The only other thing I can see is maybe a faulty ignition coil insulator housing. If that's the case, try another brand coil. Preferably a Delco.
Steve
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Having trouble at freeway speeds
Annoying shaking during deceleration
p119f22 ‘Deterioration of the engine oil’ - 2017 Peugeot Boxer Euro 6 2.0 Blue HDi
Misfire on coil E
