Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






Saturn transmission or electrical problem


Search for (search options)
 



Mikie
New User

Jul 21, 2012, 11:33 PM

Post #1 of 2 (2854 views)
Saturn transmission or electrical problem Sign In

Help! Help!
I have a 2001 Saturn SL2, 120k, bought knowing had transmission problem. Bangs going into reverse and drive. Also in limp mode starts in 2nd gear shift to 3rd, will shift no further, when downshifting back to 2nd, shifts hard and rough. So far, I have replaced wiring harness going from PCM to engine and transmision and fuse box, checked continuity on new harness and all wires test good. with car running getting around 14 volts at transmision connector, (I guess over 12 because engine running and charging??) Ohmms checked on solenoids, all within specs. So far have put on two other used valve bodies from used transmsions that were sold to me as being good. Codes that come up on all three valve bodies, PO746, PO756, PO761, PO789, and then one valve body additional codes of PO732 and PO741 with the other four named above come up. (but only with this valve body.) I am suspecting PCM??? Any body help!
Mikie


nickwarner
Veteran / Moderator
nickwarner profile image

Jul 22, 2012, 10:09 AM

Post #2 of 2 (2803 views)
Re: Saturn transmission or electrical problem Sign In

All these parts you're throwing at it and it hasn't occurred to you that the internals of this trans could be worn out? Usually when it bangs on shifts its due to excessive clearance in the drum because the clutch discs are worn down.






 
 
 






Search for (options) Privacy Sitemap