|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 15, 2012, 1:41 PM
Post #26 of 36
(2591 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
The truck would have to be towed to the dealer to program the PCM before it could run anyway. You can just throw one in there.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jacklikesbeans
User
May 15, 2012, 2:31 PM
Post #27 of 36
(2586 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
Also noticed I'm getting no power to my camshaft sensor
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 15, 2012, 2:47 PM
Post #28 of 36
(2583 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
Have you pulled codes on this yet?
You'll probably have to clear everything first and then check for codes after trying to start it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jacklikesbeans
User
May 15, 2012, 5:04 PM
Post #29 of 36
(2577 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
When I first had it towed home it gave me codes for lean on bank 2 and misfire on a cylinder. now it can't find any codes (assuming because I took off battery)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 15, 2012, 5:10 PM
Post #30 of 36
(2575 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
That would be correct but if you have no cam sensor signal, it will set a new code as soon as you attempt to start it.
You didn't change the position of that sensor, did you?
If you have a scan tool, crank tghe engine and see if there is an RPM registered.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on May 15, 2012, 5:15 PM)
|
|
| |
|
|
jacklikesbeans
User
May 15, 2012, 5:13 PM
Post #31 of 36
(2570 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
no, I haven't changed it's position. It never sent a code when I've attempted to start it.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 15, 2012, 5:21 PM
Post #32 of 36
(2568 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
See my edit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jacklikesbeans
User
May 15, 2012, 5:31 PM
Post #33 of 36
(2562 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
I ran the scan tool while turning the van over and nothing showed up on the scan tool.
My scan tool is a cheap and basic Innova 3030, do the cheap ones check for RPM?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 15, 2012, 5:33 PM
Post #34 of 36
(2557 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
I don't know. Do you have a data title called "RPM"?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jacklikesbeans
User
May 15, 2012, 5:41 PM
Post #35 of 36
(2554 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
No, I don't believe it reads rpm. Should I go buy a camshaft sensor and see if that works?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 15, 2012, 5:44 PM
Post #36 of 36
(2551 views)
|
|
Re: No spark 2002 windstar
|
Sign In
|
|
No, I think you should spend the money on a qualified diagnostic tech and let him diagnose it for you. This has become something you're not equipped for.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
