Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









How to disable ALA990K ignition disabler


Search for (search options)
 



louretire
New User

Jun 7, 2011, 5:41 PM

Post #1 of 7 (6930 views)
  post locked   post icon How to disable ALA990K ignition disabler  

 

I would like to remove the ALA990K ignition disabler from my 2001 Saturn SL. It is not functioning correctly and I having a hard time starting the car after entering personal code.

Since all Saturn dealers are out of business, is there an easy way for it to be remove or disabled it? Do I need to go to a repair shop or can simply cut the wires from ALA99K to the ignition?

Thank you,

lou Smile


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 7, 2011, 6:30 PM

Post #2 of 7 (6918 views)
  post locked   Re: How to disable ALA990K ignition disabler  

I have no idea what you're dealing with there. it';s not a factory system. the factory uses the passlock system and you can't do anything about that.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



louretire
New User

Jun 10, 2011, 5:50 PM

Post #3 of 7 (6891 views)
  post locked   post icon Re: How to disable ALA990K ignition disabler  

It is strange no one knows what I am talking about, this system was used by the dealer on my 1996 Saturn and is on my 2001 Saturn. I can not be the only person with this problem.

Here is a pic of the device i am talking about

From the manufacture:

KPL - Illuminated Digital Keypad Immobilizer

KPL Picture

Features

Preset 4 digit code
10,000 Possible combinations
Bright green illuminated keypad
Starter kill relay and socket included
Passively arms itself 15 seconds after ignition key removed
Bright red status LED for deterring would be thefts (* button)
Valet mode so you do not have to give your code to others (# button)
Has option to install emergency override switch in case of keypad failure
Has option to install emergency override switch in case of system failure
Keypad dimensions: 1 3/4 inches long, 5/8 inches wide, 2 1/8 inches high




(This post was edited by louretire on Jun 10, 2011, 6:05 PM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 10, 2011, 5:52 PM

Post #4 of 7 (6887 views)
  post locked   Re: How to disable ALA990K ignition disabler  

Yes, that is just some aftermarket stuff the dealer bought outside. We have no info on it.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



zmame
Veteran / Moderator
zmame profile image

Jun 10, 2011, 7:20 PM

Post #5 of 7 (6880 views)
  post locked   Re: How to disable ALA990K ignition disabler  

I have seen these befor and removed one. The one I have taken out spliced in-line with the starter solinoid wire under the dash.

Basically follow the wires there will be wires that are sliced into you have to disconnect and reconnect the factory wires together.. not hard if you know what your doing.


ethan-honda
New User

Dec 20, 2011, 8:24 AM

Post #6 of 7 (6442 views)
  post locked   Re: How to disable ALA990K ignition disabler  

I removed one of these systems out of my 95 honda civic and i found out the easiest way to remove it was to unplug all wires from the fuse box and take everything spliced and unsplice it then, take the system out it will have a ground and also a wire plugged into the fuse box unplug all of it and pull the system out keypad and all then take all the wires you have left and match them up and tape them up and as long as its all stock wires and they are connected together it should work, it worked for me at least and its not easy i had to lay upside down with my head in the floorboard to see it all i hope this helps.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 20, 2011, 8:41 AM

Post #7 of 7 (6438 views)
  post locked   Re: How to disable ALA990K ignition disabler  

Please do not respond to old threads.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap