Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Alarm 1996 Town and Country


  Email This Post



Tedchevy69
Novice

Jun 23, 2009, 9:20 AM

Post #1 of 4 (4701 views)
Alarm 1996 Town and Country Sign In

I"m Looking at a 1996 Chrysler Town and country LXI. The alarm will not turn off, factory, so I puleed the memory fuse and now it blows horn when key is switched to on position. Power locks do not work and I believe alarm is activated key. Should I look for problem in drivers side door, also window doesn't work and I banged door panel and got it to work before alarm went haywired. Please let me know if this is common and hopefully the fix.. I'm new here and look foward to sharing my chevy experience with whoever can use it. Thankyou, Ted...Smile


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 23, 2009, 10:11 AM

Post #2 of 4 (4699 views)
Re: Alarm 1996 Town and Country Sign In

Here's how that system works
Your really going to need a factory scan tool to diagnose it.


Vehicles equipped with the Vehicle Theft Security System (VTSS) system, the doors, liftgate, hood and ignition circuit are monitored by the Body Control Module (BCM) when the system is armed. The VTSS will prevent the engine from starting until the BCM receives a disarm signal. If the VTSS is triggered, the horn will pulse, headlamps/marker lamps will flash, and the VTSS warning lamp will flash. If BCM determines the threat to be false and the VTSS is not triggered again, the system will shut down and rearm itself after three minutes . The VTSS monitoring portion of the system is split into two sections. The engine compartment section and the passenger compartment section. If a malfunction occurs in the engine compartment section, the passenger compartment section would still arm and function normally If an electrical malfunction occurs in either section of the system a Diagnostic Trouble Code (DTC) would be stored the BCM memory to aid system repair. DTC's can be retrieved using scan tool (DRB)attached to the diagnostic connector above the accelerator pedal.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Tedchevy69
Novice

Jun 24, 2009, 9:29 AM

Post #3 of 4 (4685 views)
Re: Alarm 1996 Town and Country Sign In

Hey your advice was real helpful. I did have to go into drivers door to fix wiring problem with lock and window service but it all worked out great... Thankyou for your solid advice.Sly Ted


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 24, 2009, 9:37 AM

Post #4 of 4 (4682 views)
Re: Alarm 1996 Town and Country Sign In

Glad to hear it all worked out for you.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap