|
|
2008 nissan frontier 4.0 wont start/ no fire
|
|
|
| |
|
paulcov
Novice
Mar 10, 2018, 9:44 AM
Post #1 of 5
(2084 views)
|
2008 nissan frontier 4.0 wont start/ no fire
|
Sign In
|
|
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 10, 2018, 10:29 AM
Post #2 of 5
(2077 views)
|
Re: 2008 nissan frontier 4.0 wont start/ no fire
|
Sign In
|
|
Is that all the effort you could put into your question? That's a title, not a question. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 10, 2018, 3:48 PM
Post #4 of 5
(2026 views)
|
Re: 2008 nissan frontier 4.0 wont start/ no fire
|
Sign In
|
|
How did you test the cam sensor signal and that there was power at the sensor itself? What is the voltage to the sensor and what does the signal look like coming from the sensor? Are there any trouble codes stored in the ECU for the engine? If so what are the numbers? Do you have injector pulse? What is the fuel rail pressure? Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 10, 2018, 3:54 PM)
|
|
| |
|
paulcov
Novice
Mar 11, 2018, 3:38 PM
Post #5 of 5
(1986 views)
|
Re: 2008 nissan frontier 4.0 wont start/ no fire
|
Sign In
|
|
hey man. I did not see your post till an hour ago.ive been stuggling to log in every time I try.last night I posted some answers to your questions but I don't think it made it.i tested cam sensor with a probe [power] but the signal seemed funny it had 2 codes v or u1000 and p0462 [I think] but I know it referd to the fuel level votage is low.i put 2 gallons in it with no change. when problem started it seemed it had a nuetal safty problem so I bypassed the starter relay and it ran and drove but not well I test drove 2 miles got home shut it off and had to push up driveway.fuel line had pressure in my earlier post I wrote ipcm instead of ipdm
(This post was edited by paulcov on Mar 12, 2018, 5:08 AM)
|
|
| |
|