|
|
2004 chevy impala electrical issue
|
|
|
| |
|
|
jcardinale14
New User
Apr 2, 2011, 1:46 PM
Post #1 of 2
(3407 views)
|
|
2004 chevy impala electrical issue
|
Sign In
|
|
I have a 2004 chevy impala 3.4L I had a short in the cig lighter and electrical wires melted in dash i pulled fuses to accesories heating, ac, radio, etc. to try and get the car to start I have power to ignition and from ignition but power is not reaching the starter. I have power for pcm crank fuse and power to crank relay but no power at abs/pcm fuse or bcm clustr fuse i have removed dash and instrument panels to gain access to wiring harness so I do not know if the theft light is coming on when key is turned or not when the key is in the on or start position i hear nothing. please help
(This post was edited by jcardinale14 on Apr 2, 2011, 2:25 PM)
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Apr 2, 2011, 5:16 PM
Post #2 of 2
(3391 views)
|
|
Re: 2004 chevy impala electrical issue
|
Sign In
|
|
The whole idea of putting fuses in line is to be the weak link and blow before wires get damaged. Somehow it may have been over-fused especially since it melted up wires. Now as I see it the only thing to do is get all damaged wires fixed, soldered in with proper gauge wire and strapped back in place then diagnosing this will be more meaningful. With it all messed up now there's just no telling. One hot wire could have melted another so gotta go look and fix.
Right wire, soldered, strapped in proper place and shrink wrap over splices,
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 