Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

1993 MB ignition switch no start


  Email This Post



lwilli4737
New User

Oct 17, 2012, 8:58 AM

Post #1 of 8 (1909 views)
post icon 1993 MB ignition switch no start Sign In

1993 300E 2.8L (124 028) 6 cyl eng. 104 86K miles
Engine will not start !
drove car to store, shutdown, came back 10 min. later and turned on ignition,
1. no click nothing happens.
2. turned on headlights OK
3. turned on radio OK
4.tried neutral gear no change of status
5.checked battery full charge 12.6 volts
6.heard relay buzzing unplugged and removed and replaced. no change still buzzing.
7.called tow truck and towed home.
8. checked for loose connections Ok
9. cannot find electrical drawing. please give me new suggestions please.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Oct 17, 2012, 9:20 AM

Post #2 of 8 (1885 views)
Re: 1993 MB ignition switch no start Sign In

Before you go too nuts this could still be battery connections at battery even if they look good. Just try some electrical item that should not quit when key turned to "start" position -- hazard lights, brake lights if you can see them and if they go out while just in crank position you should find just a hairline connection enough for small items but not for starter which IS the big load.

Begin with just that simple check and then can go on to see if trigger wire isn't getting power, voltage drops etc. If that happens follow any procedures for any devices that wont like battery disconnected and clean up those terminals with a wire brush or sandpaper, neg off first back on last AYOR with setting off theft items or radio locking type things or use a memory saver,

T



lwilli4737
New User

Oct 17, 2012, 9:35 AM

Post #3 of 8 (1872 views)
Re: 1993 MB ignition switch no start Sign In

   
thank you will try all the above suggestions.
regards


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Oct 17, 2012, 9:57 AM

Post #4 of 8 (1862 views)
Re: 1993 MB ignition switch no start Sign In

It's just that age and right when cars were dumping real long last lead cable ends for junk and have had troubles with tons lots younger than this. Nothing to do with MB but they didn't like lead and mercury among other metals used anywhere they could do without,

T



lwilli4737
New User

Nov 4, 2012, 9:21 AM

Post #5 of 8 (1757 views)
Re: 1993 MB ignition switch no start Sign In

So far I have found three wires with the jackets burnt off completely, 1 to the starter (#12 wire Purple/wh) 2 #14 (brown/green) 3 #14 (brown/black) of which one goes to plug in connector on pan and the other at the exhaust. do you have a drawing for these wires and also a vacuumn dwg.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 4, 2012, 10:11 AM

Post #6 of 8 (1756 views)
Re: 1993 MB ignition switch no start Sign In

Wiring diagrams are drawn by circuit and not by physical location. Besides, Mercedes wiring diagrams are hard to understand for even an experienced tech.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



lwilli4737
New User

Nov 5, 2012, 9:47 AM

Post #7 of 8 (1734 views)
Re: 1993 MB ignition switch no start Sign In

I'm in that class as a EE and can troubleshoot.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Nov 5, 2012, 11:03 AM

Post #8 of 8 (1732 views)
Re: 1993 MB ignition switch no start Sign In

OK, then what circuit do you need?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap