Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

1951 Olds electrical problem


  Email This Post



kcars
New User

May 14, 2009, 2:11 AM

Post #1 of 4 (1048 views)
1951 Olds electrical problem Sign In

My 1951 Olds 88 keeps shutting down while driving. dash gauges, radio etc all go dead and the engine stops. The car then will not start- (Its the same as if I turned the ignition off). The cars starter will still turn over but Engine will not start. A few minutes late the car will start but then shut down a few minutes later. I checked all the wiring, grounds, etc but see nothing wrong. Can someone tell me what to look for on my '51 Olds, 6 volt, v/8 car- 36,000 orig miles.
Thanks.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

May 14, 2009, 3:32 AM

Post #2 of 4 (1045 views)
Re: 1951 Olds electrical problem Sign In

Your going to have to start out buy testing for power at the + side of the coil when this is happening. If none, then test for power coming out of the ignition switch. If you do have power, then you could have a coil shorting internally.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on May 14, 2009, 3:33 AM)


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

May 24, 2009, 6:24 AM

Post #3 of 4 (1027 views)
Re: 1951 Olds electrical problem Sign In

Wild guess: I thing the body of that coil which probably has a strap needs to ground to body of coil and could be the issue??

T



rodjen700
Novice

Jul 22, 2009, 3:01 AM

Post #4 of 4 (970 views)
Re: 1951 Olds electrical problem Sign In

It is seem to me that your ignition switch /part of main switch/ is bad.
Also cable witch connecting body and ground terminal battery is suspect. Cause may be in rust bellow cable terminal and body. Solution is disassemble, eliminate rust, apply GRAFFITI grease bellow, and between, and over all parts.
Good luck






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap