|
|
|
Stuck rotor Suzuki Esteem
|
|
|
| |
|
|
danielmolina
Novice
Jul 30, 2013, 10:57 AM
Post #1 of 9
(1849 views)
|
|
Stuck rotor Suzuki Esteem
|
Sign In
|
|
I can't get the rotor off. I tried a hammer and then the bolt technique. I only bent it a little but it didn't come off. Am I missing something? (of course, I first took off the caliper and the caliper mount). Thanks in advance!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 30, 2013, 11:59 AM
Post #2 of 9
(1839 views)
|
|
Re: Stuck rotor Suzuki Esteem
|
Sign In
|
|
I think they welded them on back in the 1950's.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
danielmolina
Novice
Jul 30, 2013, 12:22 PM
Post #3 of 9
(1834 views)
|
|
Re: Stuck rotor Suzuki Esteem
|
Sign In
|
|
Sorry, I guess I forgot to say that the car is from 2001 
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 30, 2013, 12:29 PM
Post #4 of 9
(1827 views)
|
|
Re: Stuck rotor Suzuki Esteem
|
Sign In
|
|
How about the hold down screw/s that hold the rotor on?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Jul 30, 2013, 12:31 PM)
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jul 30, 2013, 12:36 PM
Post #5 of 9
(1825 views)
|
|
Re: Stuck rotor Suzuki Esteem
|
Sign In
|
|
What is the obvious problem - rusted or just stuck as this would have a tight rotor to hub. A maybe is there are #3 Phillips screws that you about must use an impact driver to remove. Some may require a bolt thru a threaded hole and you won't just beat those with a hammer to remove.
What did you bend already - the rotor and if so it's gone which is why you are there. Dang - easy sport - use a rubber hammer as needed for some to get it rocking.
Sorry I don't the exact style it's just apparent when you are looking at them. If just down to rusted stuck they can be a real pest or if you stripped out a bolt hole to pull with it's more troubles,
T
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jul 30, 2013, 12:38 PM
Post #6 of 9
(1822 views)
|
|
Re: Stuck rotor Suzuki Esteem
|
Sign In
|
|
You beat me HT - I figured it was that which will not cooperate if not removed - duh,
T
|
|
| |
|
|
danielmolina
Novice
Jul 30, 2013, 12:47 PM
Post #7 of 9
(1816 views)
|
|
Re: Stuck rotor Suzuki Esteem
|
Sign In
|
|
I don't see any screw on the front side, just two little empty holes. I have a picture but couldn't figure out how to upload it (I uploaded it to the system that pops up when clicking on "Upload Photo" but couldn't get it to show up in the actual message).
|
|
| |
|
|
danielmolina
Novice
Jul 30, 2013, 12:49 PM
Post #8 of 9
(1813 views)
|
|
Re: Stuck rotor Suzuki Esteem
|
Sign In
|
|
I think it is rusted. In fact, it was hard to get the wheel off too. I had to loose the bolts and drive the car for the wheel to come off. So, I guess the same problem applies to the rotor, unless it is attached to the hub somehow I can see...
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jul 30, 2013, 12:59 PM
Post #9 of 9
(1805 views)
|
|
Re: Stuck rotor Suzuki Esteem
|
Sign In
|
|
Rust is a killer as said. If you see two opposing holes they should be threaded but if that's all rusted and gone it will be a pest as said. Heat is not a good choice on a hub!
PB penetrating oil works but can take some time. You may have to waste some bolts that might get a grip if forced and that style was opposing holes so you would do each some so it will remove and not go cock eyed and restuck.
I hear you and not uncommon for a wheel to get stuck too but driving it if I understand you with lug nuts loose is NOT the answer!
T
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
