|
|
Stickman
Novice
May 1, 2018, 7:27 AM
Post #1 of 10
(2597 views)
|
Transmission problems
|
Sign In
|
|
Got a 2008 Dodge 1500 5.7 that at about 35 mph cutsoff and has 3 transmission codes p0714 fluid temp sensor circuit intermittent and p0716 trans rangesensor A circuit range and p0890 trans control module power relay sense circuit low. Any ideas
|
|
| |
|
gsferraro
Veteran
May 3, 2018, 5:04 PM
Post #2 of 10
(2563 views)
|
Re: Transmission problems
|
Sign In
|
|
Hello, If you clear the codes, which ones come back. Gary
|
|
| |
|
gsferraro
Veteran
May 3, 2018, 5:11 PM
Post #3 of 10
(2563 views)
|
Re: Transmission problems
|
Sign In
|
|
Hello, If you clear the codes, which ones come back? Gary
|
|
| |
|
Stickman
Novice
May 3, 2018, 7:30 PM
Post #4 of 10
(2550 views)
|
Re: Transmission problems
|
Sign In
|
|
After clearing codes P0890 and P0562 system voltage low are the 2 codes that came back. Another mechanic says it may not be reading the shift monitor or letters.when you put in gear on the dash PRND that is read by the computer
|
|
| |
|
gsferraro
Veteran
May 4, 2018, 5:19 AM
Post #5 of 10
(2537 views)
|
Re: Transmission problems
|
Sign In
|
|
Do you have access to a scan tool that shows live data? are all the squares lit up on the PRNDL ? is this always in failsafe? after you clear the codes, they come right back?
|
|
| |
|
Stickman
Novice
May 7, 2018, 5:24 PM
Post #6 of 10
(2506 views)
|
Re: Transmission problems
|
Sign In
|
|
Codes have not come back but Sometimes all squares are lit up like PRND12 and sometimes just the gear you are in thats when trans acts up when all are on.
|
|
| |
|
gsferraro
Veteran
May 8, 2018, 5:53 PM
Post #7 of 10
(2491 views)
|
Re: Transmission problems
|
Sign In
|
|
Hello, If those squares are lit up, there may be a code present, when they are all lit up, the trans is in failsafe, do you have a scan tool?
|
|
| |
|
Stickman
Novice
May 8, 2018, 6:32 PM
Post #8 of 10
(2484 views)
|
Re: Transmission problems
|
Sign In
|
|
No codes right now drove truck for 25 miles up and down hills, with code reader attached no codes. I can stop and shift through the gear ranges and sometimes It comes up all squares lighted up.Resift and it shifts correctly.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 9, 2018, 4:16 AM
Post #9 of 10
(2463 views)
|
Re: Transmission problems
|
Sign In
|
|
Your generic code reader is not capable of reading TCM codes. That would require a professional level scan tool. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Stickman
Novice
May 9, 2018, 6:51 AM
Post #10 of 10
(2451 views)
|
Re: Transmission problems
|
Sign In
|
|
Ok thanks I will have it checked and update
|
|
| |
|