Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









NEED HELP ASAP


Search for (search options)
 



98sunfire33
New User

Jan 24, 2009, 5:40 PM

Post #1 of 6 (1698 views)
post icon NEED HELP ASAP Sign In

98 SUNFIRE 2 DOOR MANUAL

I WAS DRIVING HOME AND NOTICED WHEN I ACCELERATE ITS NOOT TAKIN OFF LIKE IT USE 2 THEN LATER ON IN THE DAY MY CLUTCH WAS GOIN TO THE FLOOR EASILY WHEN PRESSED... SOON AFTER I JUMPED ON THE HIGH WAY AND HIT TRAFFIC SO HAD TO PUT THE CAR INTO FIRST GEAR IT WOULDNT GO CAR DIDNT STALL OR ANYTHING ... THEN I TURNED OFF THE CAR AND TURNED IT BACK ON AND IT WOULDNT GO INTO ANY GEAR ENGINE THEN STARTED SMOKING AROUND THE BATTERY AREA AND WHERE U PUT THE ENGINE COOLANT IN... WHAT IS THE PROBLEM PLEASE HELP CAR STILL STARTS BUT CANT GO INTO GEAR AND STARTS TO SMOKE SOFTLY


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Jan 24, 2009, 5:52 PM

Post #2 of 6 (1694 views)
Re: NEED HELP ASAP Sign In

First things, first. Check the clutch fluid. It's probably empty, which would account for the pedal going to the floor without resistance. Sounds like a hydraulic fluid leak, possibly spraying on something hot which would account for the smoke. You may have a combination of problems, but this is a place to start. If the fluid is low, fill the reservoir and check for leaks in the line going to the slave cylinder.
Loren
SW Washington


98sunfire33
New User

Jan 24, 2009, 6:10 PM

Post #3 of 6 (1692 views)
Re: NEED HELP ASAP Sign In

there is no leak i checked


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Jan 24, 2009, 6:22 PM

Post #4 of 6 (1687 views)
Re: NEED HELP ASAP Sign In

Then, it sounds like an internal clutch problem. Possible disc or pressure plate failure.
Loren
SW Washington


98sunfire33
New User

Jan 24, 2009, 6:27 PM

Post #5 of 6 (1686 views)
Re: NEED HELP ASAP Sign In

how much does it cost 2 fix


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Jan 24, 2009, 6:35 PM

Post #6 of 6 (1682 views)
Re: NEED HELP ASAP Sign In

The labor to replace the clutch, pressure plate, throw-out bearing is 5.1 hrs per Mitchell. Does not include resurfacing the flywheel.
Loren
SW Washington






 
 
 






Search for (options) Privacy Sitemap