Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Manual trani


Search for (search options)
 



eyob07
User

Jun 8, 2018, 4:23 AM

Post #1 of 3 (1372 views)
Manual trani Sign In

Hi everyone this is my friends 09 sentra.after the clutch was replaced. The car doesn't go until the clutch pedal is all the way up. It is hydraulic what could cause this.thank you.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jun 8, 2018, 6:48 AM

Post #2 of 3 (1360 views)
Re: Manual trani Sign In

? AFTER clutch was replaced ? This is wrong. The pedal is normally lower to grab with all new parts and when at the top is worn out or is the common symptom then with little to no free-play it "rides itself" wears out in no time from that.
If really new and well done there's another reason it should do NOTHING for about 3/4" at the top give or take. About all are self adjusted check also for worn bushings where pedal pivots or something goofy up to incorrect parts it isn't right and won't last this way by all odds,


T



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Jun 8, 2018, 8:59 AM

Post #3 of 3 (1345 views)
Re: Manual trani Sign In

I agree with Tom. Something was done wrong during assembly or wrong parts were used. Flywheel may have been over machined or crank is walking are other possibilities.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.






 
 
 






Search for (options) Privacy Sitemap