Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Log in LOG
IN









1999 Dodge Ram 1599 5.9L 2wd


Search for (search options)
 



maxtg09
New User

Jul 6, 2010, 2:38 PM

Post #1 of 8 (3139 views)
1999 Dodge Ram 1599 5.9L 2wd Sign In

Just installed a rebuilt transmission and new torque converter, but the transmission is not pumping the fluid, did I need to fill the T/C before installing it into the tranny. It had a little fluid in it so I did not add any, but the transmission is not pumping the fluid through the system.


(This post was edited by maxtg09 on Jul 6, 2010, 2:38 PM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 6, 2010, 2:58 PM

Post #2 of 8 (3135 views)
Re: 1999 Dodge Ram 1599 5.9L 2wd Sign In

Have you filled it yet?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Sidom
Veteran / Moderator
Sidom profile image

Jul 6, 2010, 7:40 PM

Post #3 of 8 (3131 views)
Re: 1999 Dodge Ram 1599 5.9L 2wd Sign In

Depending on the tranny you have, w/ the converter, it will hold between 11 & 16 qts of ATF.

So you need to get close before it's going to start working...........


maxtg09
New User

Jul 7, 2010, 8:29 AM

Post #4 of 8 (3124 views)
Re: 1999 Dodge Ram 1599 5.9L 2wd Sign In

I did not fill the converter before installing it in the Transmission, But I filled the transmission after installing. However it will not pump the fluid.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 7, 2010, 8:49 AM

Post #5 of 8 (3120 views)
Re: 1999 Dodge Ram 1599 5.9L 2wd Sign In

You have to continue to fill the transmission after starting the engine. It only holds a couple of quarts in te pan and that will get pumped out almost immediately so you have to keep checking and adding until it reads full.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



maxtg09
New User

Jul 7, 2010, 10:01 AM

Post #6 of 8 (3116 views)
Re: 1999 Dodge Ram 1599 5.9L 2wd Sign In

The dipstick shows that it is full, while running, but after turning off the engine, I pulled the rear transmission line and there was no fluid in the line. so I stsrted the engine and nothing was pumping through the line. I am stasrting to think that I should have filled the torque converter before installing it in the transmission. What do you think?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 7, 2010, 10:26 AM

Post #7 of 8 (3113 views)
Re: 1999 Dodge Ram 1599 5.9L 2wd Sign In

No, that's not the problem. You may have broken something or assembled it incorrectly. The converter will fill on it's own.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



hondamansi
Novice

Aug 11, 2010, 8:08 PM

Post #8 of 8 (3090 views)
Re: 1999 Dodge Ram 1599 5.9L 2wd Sign In

Did the torque converter get set right? Should slide/click in twice while rotating it into place.






 
 
 






Search for (options) Privacy Sitemap