|
|
HUb Bearing replacement question Thanks
|
|
|
| |
|
stockjocki
New User
Jun 20, 2014, 2:06 PM
Post #1 of 4
(1524 views)
|
HUb Bearing replacement question Thanks
|
Sign In
|
|
Hello everyone I am new here and I know you all get asked a million questions so before I came here I tried to figure out the answer to mine but to no avail. I have a 2005 Toyota Corolla and I was told my front hub bearing is starting to make noise. So I figure I will replace it my questions is instead of replacing just the bearing because as I see it requires a press to press the bearing out I was wondering I know it will cost more for the part but does the hub assembly contain the bearing in it or are they two separate items it seems the assembly is much easier to install and I hope this would work please let me know.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 20, 2014, 2:23 PM
Post #2 of 4
(1514 views)
|
Re: HUb Bearing replacement question Thanks
|
Sign In
|
|
The bearing is pressed into the knuckle and then the hub flange is pressed into the bearing. They are pieces that are sold seperately unless you get the whole knuckle with bearing and hub from a salvage yard. What you could do to save some money, if you want to do this yourself, is to remove the knuckle and have a repair shop press the new bearing in for you. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 20, 2014, 2:26 PM)
|
|
| |
|
stockjocki
New User
Jun 20, 2014, 2:26 PM
Post #3 of 4
(1510 views)
|
Re: HUb Bearing replacement question Thanks
|
Sign In
|
|
thank you
|
|
| |
|
nickwarner
Veteran
/ Moderator
Jun 22, 2014, 12:51 PM
Post #4 of 4
(1472 views)
|
Re: HUb Bearing replacement question Thanks
|
Sign In
|
|
Most shops in my area will do the press work for you for 35-50 bucks, so you can save some cash by pulling the spindle and bringing it to them.
|
|
| |
|