|
|
|
1988 chevy sil. w/ shuttering problem
|
|
|
| |
|
|
krism13d
New User
Aug 8, 2009, 5:59 PM
Post #1 of 5
(7218 views)
|
1988 chevy sil. w/ shuttering problem
|
Sign In
|
|
1988 chevy
sil. 1500
350 (5.7)
60,000 miles (new motor)
truck will idle fine then when u put it in gear or try to excelerate the engine stutters & stalls, it doesnt want to pull itself. gave no worning just started runnin like crap. it's kickin up a lean code we've replaced the fuel filter, fuel pump, strainer, o2 sen., esc moduel, ignition control mod, throtal position sen, iac motor, map sen, coolant temp sen, intake air temp sen, knock sen, plugs cap & rod. button. dont know what else to do except roll it off a cliff!!!!!!!!
plz help thanx kris
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 8, 2009, 10:18 PM
Post #2 of 5
(7209 views)
|
|
Re: 1988 chevy sil. w/ shuttering problem
|
Sign In
|
|
Have you checked the computer for codes yet?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Aug 9, 2009, 10:06 AM
Post #3 of 5
(7202 views)
|
|
Re: 1988 chevy sil. w/ shuttering problem
|
Sign In
|
|
Wow 
Just so I'm straight on this. The engine won't run at all when in gear or just will run if you get past idle & low speed?
No offense but some of that stuff you replaced would have absolutely nothing to do with the problem you are having...
Also get a spark tester (not a screwdriver) & check the coil output up to 40kv
|
|
| |
|
|
krism13d
New User
Aug 9, 2009, 2:00 PM
Post #4 of 5
(7194 views)
|
|
Re: 1988 chevy sil. w/ shuttering problem
|
Sign In
|
|
i know, some of the things we replaced were bad when we bought the truck. we got it from an old man & when it gave him problems his solution was to unplug the sencer that he thought would have been causing the problem. thanx for your help but simply by chance we figured out the problem today. we had replaced the fuel pump about a month ago when it went out so today we took it back out to c if we had knocked something apart or had a line crimped when we took out the pump the new sock somehow desolved & the pieces sucked up inside the pump to cause a blockage. dont ask me how it happened but we cleaned it out replaced the sock & it runs fine now. thanx agian for your thoughts have a great night
(This post was edited by krism13d on Aug 9, 2009, 2:01 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
