|
|
|
700R4 TV Cable adjustment help needed
|
|
|
|  |
|

lpedwards
New User
Mar 16, 2026, 9:53 AM
Post #1 of 2
(3500 views)
|
|
700R4 TV Cable adjustment help needed
|
Sign In
|
|
I have a '48 Chevy Fleetmaster sport coupe with a 700R4 transmission. I have viewed several YouTube videos with advice on adjusting the TV cable to get the proper shifting intervals and the downshift correct. They all say the cable should be tight rather than loose and it should shift into 2nd at 20 mph. Mine was shifting into 2 at about 15 mph and the cable was a little loose. I adjusted it to be tighter. It now shifts at 20 mph. But it is a very hard shift and seems like it's way too many rpms before it shifts. My concern is they say if it is loose it will damage the transmission. I sure don't like the extreme hard shift or the high rpms. Any advice is greatly appreciated
|
|
|  |
|

Hammer Time
Ultimate Carjunky
/ Moderator

Mar 16, 2026, 12:41 PM
Post #2 of 2
(3493 views)
|
|
Re: 700R4 TV Cable adjustment help needed
|
Sign In
|
|
Doctor youtube is not always right. You could have a different gear ratio than the youtube vehicle. You could also have a longer throw on the throttle arm that operates it. Adjust it to where you are comfortable with the shift points. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Mar 16, 2026, 12:43 PM)
|
|
|  |
|