|
|
|
2000 chevy s-10 transmission issue.
|
|
|
| |
|
|
Al17866
User
Dec 18, 2015, 10:19 PM
Post #1 of 20
(2388 views)
|
|
2000 chevy s-10 transmission issue.
|
Sign In
|
|
Hello my trans was shifting hard. And it wouldn't always up shift when kicking in the passing gear. Checked the fluid it was brown. Drained trans and broke the shift solenoids dropping the pan. Replaced them and put a bottle of Lucas in and added trans fluid to the proper level. Hard shift is gone. And the passing is working. But now when starting out 1st gear seams to slip. After its in 2nd it good through all the gears. Thanks Allen.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Dec 19, 2015, 6:04 AM
Post #2 of 20
(2379 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Hi Allen: Site has a trans specialist and expect him by at some point. It's frequently its own specialty but known from training and do just lacking lots of it.
First - brown fluid is plain not a good sign for an automatic trans from wear alone strongly suggests to me as a wearing item too that its time has come for an overhaul. There are plain wearing parts that don't heal on their own nor magic in a bottle to do more than buy time or can make it worse.
Wait for more suggestions but asking what broke solenoids? YOU or found them that way?
Expect an overhaul to really put it back in order and dependable for the long run,
T
(This post was edited by Tom Greenleaf on Dec 19, 2015, 6:06 AM)
|
|
| |
|
|
Al17866
User
Dec 19, 2015, 11:28 AM
Post #3 of 20
(2369 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
I broke the solenoids taking down the pan.
|
|
| |
|
|
gsferraro
Veteran
Dec 19, 2015, 12:14 PM
Post #4 of 20
(2366 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Hello,
Did youby chance put a new filter in this unit, if so, where did you get it. Also, when you refilled the trans did youlook at both sides of the dipstick? I keep shift solenoids in stock, im always getting calls from the local stations that service these transmission, happens alot. What brans solenoids did you get OE? Gary
|
|
| |
|
|
Al17866
User
Dec 19, 2015, 12:21 PM
Post #5 of 20
(2362 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
No i didn't do the filter. Reason is i did a trans on my jimmy. They gave me 2 choices and i put the wrong one in
and ruined the trans. Even put the other filter in and it still failed. Yes checked both sides of the dip stick. The solenoids were car quest from advanced.
|
|
| |
|
|
gsferraro
Veteran
Dec 19, 2015, 1:23 PM
Post #6 of 20
(2354 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Hello,
Ok, i actually never heard of car quest brand, next thing i would like you to do is when your taking off in drive and youfeel it slip or maybe it feels heavy off the line, put the shifter into manual one and see if it still feels the same or does it feel better. Gary
|
|
| |
|
|
Al17866
User
Dec 19, 2015, 1:45 PM
Post #7 of 20
(2350 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Ok drop her down into l1 and it works fine.
|
|
| |
|
|
gsferraro
Veteran
Dec 19, 2015, 2:09 PM
Post #8 of 20
(2347 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
ok, so if it feels better, it may be starting out in 2nd gear, possible faulty shift solenoid, just to confirm it didnt do this before? I know you dropped the pan, was that just to service the trans? Gary
|
|
| |
|
|
Al17866
User
Dec 19, 2015, 2:24 PM
Post #9 of 20
(2341 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
I changed the fluid because it was shifting hard. Almost like it had a racing valve body. And it wouldn't up-shift after kicking in the passing gear. And the fluid was brown. But it did take off fine prior to the change. When i start out in drive it does up-shift 3 times. But slips in 1st.
|
|
| |
|
|
gsferraro
Veteran
Dec 19, 2015, 3:00 PM
Post #10 of 20
(2336 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Does it race up when trying to move?
|
|
| |
|
|
Al17866
User
Dec 19, 2015, 3:02 PM
Post #11 of 20
(2332 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Yes somewhat. It will only tach to 2500 rpm. When starting from drive.It does move though.
|
|
| |
|
|
gsferraro
Veteran
Dec 19, 2015, 7:42 PM
Post #12 of 20
(2323 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Hello,
One more question, if you put this in drive 3 does the same thing happen? Gary
|
|
| |
|
|
Al17866
User
Dec 19, 2015, 8:11 PM
Post #13 of 20
(2318 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Ok in 4th/OD slips the worst. In 3 it slips less. 2nd and 1st No slip.
|
|
| |
|
|
gsferraro
Veteran
Dec 20, 2015, 7:08 AM
Post #14 of 20
(2303 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Hello,
Getting back to the hard shifting problem for a moment, this may have been high line pressure, did you ever have this car scanned for codes? Gary
|
|
| |
|
|
Al17866
User
Dec 20, 2015, 10:47 AM
Post #15 of 20
(2293 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Yes i have an obd2 scanner no codes. Also the harsh shift is gone. Another thing when im in drive and do a rolling stop and then pull out its fine too.
|
|
| |
|
|
gsferraro
Veteran
Dec 20, 2015, 11:49 AM
Post #16 of 20
(2289 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
I forgot to ask you how reverse is, if reverse is good, that would eliminate your pump,filter and pressure reg valve, im not sure why this was shifting hard,but at this point you may have an issue with your foward clutch or low sprag. with your scanner can you see live data?
|
|
| |
|
|
Al17866
User
Dec 20, 2015, 11:58 AM
Post #17 of 20
(2285 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
Reveres is good. My scanner is only a basic one. I wish it could record live data.
|
|
| |
|
|
gsferraro
Veteran
Dec 20, 2015, 12:10 PM
Post #18 of 20
(2282 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
At this point you may have an internal problem, do any transmission shop offer a free check, or go to one and ask them to road test the car
|
|
| |
|
|
Al17866
User
Dec 20, 2015, 3:50 PM
Post #19 of 20
(2272 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
My neighbor told me about a plac e who's been doing transmissions for over 30 years. Im going to go see him. I\ll let you know what he says then.
|
|
| |
|
|
gsferraro
Veteran
Dec 20, 2015, 5:35 PM
Post #20 of 20
(2263 views)
|
|
Re: 2000 chevy s-10 transmission issue.
|
Sign In
|
|
ok sounds good, let me know what they say
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Strut spring orientation and strut mount tension nut
