|
|
charles2013
New User
Dec 22, 2013, 7:17 AM
Post #1 of 3
(1477 views)
|
88 crown Victoria
ford
ltd
5.0
36,000
car wont sart. it sounds like it wants too. but wont. I recently had a new cd player put in. and the person whoo hooked it up, hooked extra speakers directly from the cd player, it caught fire. I have unplugged it. N ow I was driving to a store it was running good like normal. I park turn off the car go shopping, come bac and wammy wont turn over, please help me
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Dec 22, 2013, 8:01 AM
Post #2 of 3
(1463 views)
|
So the starter is cranking the engine, but the engine doesn't want to run?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Dec 22, 2013, 8:55 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 22, 2013, 10:16 AM
Post #3 of 3
(1455 views)
|
All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.
Every engine requires spark, fuel and compression to run. That's what we have to look for.
These are the basics that need to be tested and will give us the info required to isolate a cause.
1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.
2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.
3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.
4) If all of these things check good, then you would need to do a complete compression test.
Once you have determined which of these functions has dropped out,
you will know which system is having the problem.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
