Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




2005 Ford F150 code PO174

Search for (search options)
 



Dave T
New User

Aug 10, 2015, 6:44 PM

Post #1 of 5 (2935 views)
2005 Ford F150 code PO174 Sign In
Drove thru a large puddle and car started running rough.
The check engine light came on.
I checked codes and it said misfire in cylinder 3.
Its done this before and self corrected.
I changed the plugs, wires and coil pack.
It still runs rough with engine light still on.
Now there's a PO174 code
System 2 lean bank 2
What am I missing?
Thanks in advance.


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Aug 11, 2015, 4:48 AM

Post #2 of 5 (2908 views)
Re: 2005 Ford F150 code PO174 Sign In
 Is it still misfiring on #3 cylinder? You need to figure out why it is misfiring before tacking the P0174 code.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Aug 11, 2015, 4:48 AM)


Dave T
New User

Aug 11, 2015, 11:14 AM

Post #3 of 5 (2890 views)
Re: 2005 Ford F150 code PO174 Sign In
The misfire code isn't coming up now, but it's still running rough.
I'm at a loss


Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Aug 11, 2015, 5:41 PM

Post #4 of 5 (2881 views)
Re: 2005 Ford F150 code PO174 Sign In
Did the engine suck up any water from the puddle you went through?

The code may not come back for a while if it is still missing on that cylinder because you reset the monitors when you cleared the codes. Does it feel like a dead misfire? Does it miss all the time? Unplug each injector one at a time while the engine is idling and misfiring to figure out which cylinder(s) is misfiring. The one injector you unplug that doesn't make a change in the running of the engine is the one misfiring.





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.

(This post was edited by Discretesignals on Aug 11, 2015, 5:42 PM)


Dave T
New User

Aug 11, 2015, 9:37 PM

Post #5 of 5 (2868 views)
Re: 2005 Ford F150 code PO174 Sign In
Not sure where the engine would suck up water( air intake?)
But it's possible.
The water was at least 6 inches deep.
I will try disconnecting the injectors.
What other that plugs wires and coil pack would cause a misfire ?





 
 
 






Search for (options) Privacy Sitemap