Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   Lukewarm Heat............
New antifreeze reverse flush heater core...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   2014 Nissan Sentra Shaking
Car recently started shaking when accele...

no_replies.gif image   Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
N/A

hot_with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...




2006 GMC Canyon HVAC help

Search for (search options)
 



crosswindian17
New User

Dec 4, 2022, 5:58 AM

Post #1 of 4 (2905 views)
2006 GMC Canyon HVAC help Sign In
2006 GMC Canyon 5cyl pickup. Blower motor quit.
I first checked fuses and relays, all were good, so I replaced the resistor, resistor electrical connector, the blower motor, the blower motor electrical connector, and the cabin air filter.
Everything worked for about a week, but last night I started my truck and fan won't blow again.
Can anyone give me some advice on this?

P.S. only codes on the scanner are catalytic converter, and that has been addressed


(This post was edited by crosswindian17 on Dec 4, 2022, 6:09 AM)


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Dec 4, 2022, 10:49 AM

Post #2 of 4 (2891 views)
Re: 2006 GMC Canyon HVAC help Sign In
Easy - you did a parts tossing game and all likelihood one or more isn't good.

That or the contacts how they plug in.

Cloned parts stink see if you can see one overheated.

Blowers can be run on a workbench - removes doubt. Parts tossing just confuses the show,

T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 5, 2022, 2:26 PM

Post #3 of 4 (2844 views)
Re: 2006 GMC Canyon HVAC help Sign In
Tired blower motors have a habit of overloading resisters and burning them out. If you already changed the blower motor, then look at the connectors for any overheated plastic.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Nacho
User

Dec 5, 2022, 7:18 PM

Post #4 of 4 (2829 views)
Re: 2006 GMC Canyon HVAC help Sign In
Blower motor resistor and pigtails are the most common failures on these GM trucks and Toyota Tacomas. Blower motor itself, not so common. My first advise would be inspecting the splices where you connected the new harness. The should be soldered. Next step: check the pigtail and resistor contacts. You may need to tighten those. Cabin air filter? Not from the factory, unless adapted.


(This post was edited by Nacho on Dec 5, 2022, 7:19 PM)





 
 
 






Search for (options) Privacy Sitemap