|
|
bulkunloader
New User
Sep 27, 2016, 4:52 AM
Post #1 of 2
(1902 views)
|
I'm new here and need some advice about body filler. I have a old Power Wagon I'm doing some body repair on and had dents and couple holes in the roof area and got the dents pounded out and holes filled best I could then was putting some filler on and must not have got the right ratio and the filler did not turn hard and now it will not sand off filler has been on 2 days and just clogs the sand paper. I can not scape off can not sand off how do I get it off and start over with a hotter load? Thanks in advance for your comments and jabs as I'm sure I will get.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 27, 2016, 5:06 AM
Post #2 of 2
(1897 views)
|
My best advice to you is leave the body work to the professionals. What you are attempting is going to be a disaster in the end.
You are going to have to use a grinder now to strip that down to metal.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 