I am installing a new stereo in the alero, old one had some problems. After removing factory radio I clipped the factory connector and wired the new connector to the harness. I then discovered that I have no voltage in the power wire. This is in the acc and on positions of the ignition switch. Fuse is ok. Where did my power go and why?

are you sure you have the power wire? Or the memory

I am going by the orange wire which according to the wire diagram is the power wire. If I am wrong please correct me.

No big deal here, I just tapped into an ignition wire and hooked it up that way. I was just curious to see if anyone knew if rhere was a junction box or a fuse or some other harness that would cause a problem. Thanks for your help and I will try and help someone else if i can