I have been informed that I need to replace both axle boots on my car. And that the axle has to be removed, then the boots can be replaced. My question is this, I have heard that there is a new kind of boot out there (it either snaps or is riveted together) allowing future repair to be easier and much cheaper, if that is true, can I request these new type of boots from my dealer, or do I need to take the car to a private mechanic? Thanks!

Stay away from those "quick"put together boots..
Go with what it came with...

Now...
IMO again...
If the axle /joint is making noise....replace the entire axle...
Axles are not that expensive , especially if your car doesn't have ABS (anti-lock brakes)..and the car is a 95....
I assume original axles right?
IF joints are ok,its ok to replace the boots..if thats what you desire...
MY car...new axle...(replacement axle/re-manufactured)
Yes,your local shop/mechanic (qualified)(trusted) should be able to handle this job for you...

Just my opinion


(This post was edited by JIM N on Mar 26, 2008, 4:53 PM)

I agree with Jim. The replacement axle is faster and easier than replacing the boots. Also the entire axle assembly will have a warranty on it. Ask about warranty on the repair before you have it done. Good luck.




http://www.publicsurplus.com/...owse/cataucs?catid=4 <<< Click on link and see our surplus vehicles for sale.
Being way2old is why I need help from younger minds.

Just to add: Some of the rebuilt whole axles (they do keep the parts that are ok but new boots always) can be under a hundred bucks! Hard to do just the boots for that,

T
Tom Greenleaf - MetroWest Boston - USA
_________________________________________

http://www.autoacsystems.com/tomgreenleaf/