Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






Search Auto Parts

Need help on electrical: install/connect fog lights


  Email This Post



courtroom
New User

Aug 18, 2009, 1:03 PM

Post #1 of 1 (2716 views)
Need help on electrical: install/connect fog lights Sign In

Brought a set of after market fog lights from xtra-lights.com. The parts came didn't match to the diagram (only installation instruction) and try to contact customer service but not response (yea, what service ... don't even answer email or phone ... go figure how they stay in business).

The diagram and parts has a connectors to the 2 fog lights (blue and black wires on each connector), the other end of this: blue, black and red wire goes to a relay, with a red wire come out and connect to a 15 amp fuse, the red wire come out of the fuse and open for connection.
The diagram shows to positive. There's another set of black and red wire come out and open for connection from the same set of fog light wires. See pic Parts1.jpg (right side). The diagram (instruction.jpg) shows the connection of the panel switch (left side of Parts1.jpg) to the connection from above but it indicates there should be a white wire. The only white wire I have is from the panel switch. My questions are:
1. Is it possible the extra red wire from the fog light connector part is really should be white?
2. The connector from the panel switch's white wire is a slip on clip, so it's not ready to make connection, is the white wire really needed?
Thanks for any suggestion.

For some unknown reason, I uploaded 2 images referenced above here but don't see it in the post. I do see them as attachment when I'm in edit mode Frown



(This post was edited by courtroom on Aug 19, 2009, 5:32 AM)






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap