Main IndexAuto Repair Home Search Posts SEARCH
Who's Online WHO'S
Log in LOG

hydraulic clutch on'88 blazer

car parts image

  Email This Post

New User

Feb 16, 2008, 10:54 AM

Post #1 of 2 (938 views)
hydraulic clutch on'88 blazer Sign In

Is it possible to bleed the hydraulic clutch, and how? The car sat for a long time and the reservoir for the clutch got low. Now it is hard to shift into 1st
from a dead stop. It didn't have any problems like this when it was parked. I'm wondering if some air got down into the line. thanks in advance for any help. Jon

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Feb 16, 2008, 11:08 AM

Post #2 of 2 (935 views)
Re: hydraulic clutch on'88 blazer Sign In

Can you find a bleeder at the slave cylinder? You would push clutch to floor and open it, shut quickly after a couple seconds and repeat. If per chance there is no bleeder I would try using the line nearest to it and highest up,

Does it look like this? Brassy thing is the bleeder....


Long retired now

(This post was edited by Tom Greenleaf on Feb 16, 2008, 11:13 AM)

  Email This Post

Feed Button

Search for (options) Privacy Sitemap

site analytics