Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

clunky reverse 01 ram 1500


  Email This Post



brian w
Novice

Dec 27, 2008, 11:43 AM

Post #1 of 10 (2536 views)
clunky reverse 01 ram 1500 Sign In

I have a 2001 ram 1500 4wd truck with a 5.9 that recently began to have front end issues. when i put it in reverse the front end feels as if it is locking up. at first i thought it was just slipping on the snow and ice, but today i drove it to a cleared empty lot and tried reverse. terrible front end feeling. as if the brakes are catching and releasing. runs fine in forward gears. whats going on with my poor truck? the truck has 90,000 miles on it and. it has a few minor issues as well, such as an evaporative emissions leak and a soft rattle at higher rpms.


(This post was edited by brian w on Dec 28, 2008, 7:36 AM)


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Dec 27, 2008, 12:20 PM

Post #2 of 10 (2532 views)
Re: clunky reverse Sign In

Do a thourough inspection of the driveshaft/u-joints going to the front differential; and the brake calipers for loose, missing, bolts, ect. Also, check the u-joints on the front axles. I would expect more problems than just reverse if it were in the differential, itself, but might check the fluid level, just to be sure.
Loren
SW Washington


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Dec 27, 2008, 1:45 PM

Post #3 of 10 (2528 views)
Re: clunky reverse Sign In

Hmmm? Just questions to add: Will it do this if in plain 2WD, steering straight ahead regardless of forward or reverse or only reverse? If in 4WD mode, some aren't designed to differentiate on NON slippery surfaces and feel wildly wrong on plain wet or dry surface AND steering. Not sure how this one is set up - Loren may know better on the types available for this truck,

T



Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Dec 27, 2008, 1:50 PM

Post #4 of 10 (2523 views)
Re: clunky reverse Sign In

You are absolutely right. 4X4 does not like bare pavement. Wide, gradual turns, only. Now that you mention it, it is worse backing and turning tight. I was actually able to take mine out of 4X4 today! Rain, 44F.
Loren
SW Washington


brian w
Novice

Dec 27, 2008, 2:03 PM

Post #5 of 10 (2520 views)
Re: clunky reverse Sign In

only in reverse. both in and out of four wheel drive. i am also in sw wa. oh, and it does it whether steering or not.


(This post was edited by brian w on Dec 27, 2008, 2:06 PM)


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Dec 27, 2008, 2:28 PM

Post #6 of 10 (2514 views)
Re: clunky reverse Sign In

Brian; Since it does it only in reverse, I doubt that it is the differential. Are you certain that it is coming from the front? (noises can transfer and fool ya) Check those caliper mounts and the front axle U-joints. Does the noise go away with the brakes applied?
Loren
SW Washington


brian w
Novice

Dec 27, 2008, 2:38 PM

Post #7 of 10 (2513 views)
Re: clunky reverse Sign In

it does not go away when i brake. it also sends vibrations through my steering.


brian w
Novice

Jan 3, 2009, 9:15 PM

Post #8 of 10 (2493 views)
Re: clunky reverse 01 ram 1500 Sign In

Hey, it was only the brakes. Once the snow melted and it wasn't so messy, I was able to remove the wheel and find my caliper missing a bolt. Thanks for the input, guys. Have a good 09.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jan 4, 2009, 7:42 AM

Post #9 of 10 (2490 views)
Re: clunky reverse 01 ram 1500 Sign In

Thanks for the followup Brian. Hopefully it can help others,

T



brian w
Novice

Jan 4, 2009, 8:53 AM

Post #10 of 10 (2484 views)
Re: clunky reverse 01 ram 1500 Sign In

no problem. i will be back with a few more questions as soon as i have time to post em.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap