|
|
eadaniele
New User
Sep 30, 2012, 8:36 AM
Post #1 of 5
(1565 views)
|
|
keyless entry progamming
|
Sign In
|
|
why cant i read your answer to my post.it says access denied why is this being said
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 30, 2012, 8:41 AM
Post #2 of 5
(1553 views)
|
|
Re: keyless entry progamming
|
Sign In
|
|
Here is the link to your thread. Do you still get denied?
http://autoforums.carjunky.com/...search_engine#127156
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Sep 30, 2012, 8:46 AM
Post #3 of 5
(1546 views)
|
|
Re: keyless entry progamming
|
Sign In
|
|
Here's just the content if other didn't show this may??
********************
To Program Wireless Remote Transmitters:
Begin with: ^
The driver's door open and unlocked. ^
Key out of the ignition.
1. Insert and remove the key from the ignition switch 2 times within 5 seconds.
Steps 2 and 3 should be performed within 40 seconds.
2. Close and open driver's door TWICE.
3. Insert the key into the ignition and remove it.
Steps 4 - 6 should be performed within 40 seconds.
4. Close and open the driver's door twice.
5. Insert the key into the ignition.
6. Close the door.
Steps 5 and 6 should be reversed for the following models ONLY (close door first, then insert key into ignition): ^
2000 - 2005 Celica ^
2001 - 2003 Prius ^
2001 - 2005 ECHO ^
2001 - 2005 RAV4 ^
2003-2004 Avalon
7. Turn the ignition switch from "Lock" to "On" and back to "Lock" at about 1 second intervals to select the desired mode: ^
1 time for ADD mode. ^
2 times for REWRITE mode. ^
3 times for CONFIRMATION mode. ^
5 times for PROHIBITION mode.
8. Remove the key from the ignition.
9. To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 7.
If Confirmation or Prohibition modes have been selected, opening the door will complete the procedure.
10. For Add or Rewrite modes do the following within 40 seconds of Door Lock confirmation:
A. Press both transmitter Lock and Unlock buttons simultaneously between 1 and 1.5 seconds and release.
B. Within 3 seconds of step A press the transmitter Lock button for more than 1 second and release. ^
If the transmitter has been successfully programmed, the power locks will cycle "lock" to "unlock" once at this time. ^
If there are problems with the transmitter or the procedure up to this point, the locks will cycle twice. If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure.
C. If multiple remotes are to be reprogrammed, repeat steps A and B.
11. Open the driver's door to conclude programming mode.
*****************
Computers? Who knows sometimes.............
T
|
|
| |
|
|
eadaniele
New User
Sep 30, 2012, 12:29 PM
Post #4 of 5
(1530 views)
|
|
Re: keyless entry progamming
|
Sign In
|
|
thank you. iwas not denied this time.the answer ton the keyless entry does not work. tried several times. does anybody have any othyer answers
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 30, 2012, 3:04 PM
Post #5 of 5
(1522 views)
|
|
Re: keyless entry progamming
|
Sign In
|
|
OK, if you're going to use this one, I now locked the other one.
I guess this is what you need then. The car need to be diagnosed. If you are not equipped to do that, tow it to the dealer.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Sep 30, 2012, 3:06 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
