|
|
control arm shaft removal
|
|
|
| |
|
|
biil9
New User
Mar 1, 2012, 4:42 PM
Post #1 of 7
(2856 views)
|
|
control arm shaft removal
|
Sign In
|
|
i have a tubular upper control arm for an 89 mustang. i took off the bronze nuts on each end but i am not sure what the best method is to remove the control arm shaft. the shaft turns freely by hand. any help would be appreciated. thank you.
barry
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 1, 2012, 4:55 PM
Post #2 of 7
(2841 views)
|
|
Re: control arm shaft removal
|
Sign In
|
|
The bushings have to be pressed out the remove the shaft from the control arm.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
biil9
New User
Mar 1, 2012, 4:58 PM
Post #3 of 7
(2834 views)
|
|
Re: control arm shaft removal
|
Sign In
|
|
ok. i'll take them to my mechanic. thank you.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 1, 2012, 5:21 PM
Post #4 of 7
(2824 views)
|
|
Re: control arm shaft removal
|
Sign In
|
|
That's funny. The foxes didn't have a control arm shafts in the lower control arms. The lower control arm has two bolts with nuts that slide through the frame and the bushings on the control arms to hold it in place. Doesn't have an upper because the fox uses front struts. I have one sitting in the garage as I type this.
Must have some sort of front end modification done on it.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Mar 1, 2012, 5:22 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Mar 1, 2012, 5:23 PM
Post #5 of 7
(2816 views)
|
|
Re: control arm shaft removal
|
Sign In
|
|
He did specify upper.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Mar 1, 2012, 5:33 PM
Post #7 of 7
(2804 views)
|
|
Re: control arm shaft removal
|
Sign In
|
|
If he stated upper, then his must be really special because that fox doesn't use upper control arms.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Tierod end change caused some kind of leak
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
