What kind of carburettor is it - Car Troubleshooting


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

2006 Toyoto Camry XLE Driver Side Electric Window Trouble

Hello, Looking for a little brain help ...

Tierod end change caused some kind of leak

Hello so I just took my car to the nearb...

2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes

When I bought this car in summer 2023, a...

Grounding Cable, 2017 Jeep Renegade Trailhawk

The Cable that connects my negative batt...

Rough Idle (Found new thing)

Hi everyone. First of all sorry for bad ...

equipment

hey yall. im a first year engineering st...

HELP

I have a 1956 1/2 ton panel truck, 69 35...

Howdy

    Just wanted to s...

ABS/Tractiob/Brake Lights on But No DTCs

Hello all, Recently while driving m...

Chevy strut replacement

I'm trying to get a sensor of some kind ...

What kind of carburettor is it

Sign up here!

Email This Post

Auto Repair Home>> Automotive Repair>> Car Troubleshooting

philippepom
User

Aug 18, 2014, 1:52 PM

Post #1 of 3 (1786 views)

What kind of carburettor is it	Sign In

Hi

I was wondering what kind of carburettor it is :

http://hpics.li/db371b0

http://hpics.li/88c004d

Also, is their a simple tutorial to rebuild those on youtube ?

Thanks.

Edit : It is the carburettor of a oliver oc3 crawler.

http://media.sandhills.com/...EeC4YLyTfyOedJH0jgZQ

(This post was edited by philippepom on Aug 18, 2014, 1:56 PM)

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Aug 18, 2014, 2:29 PM

Post #2 of 3 (1774 views)

Re: What kind of carburettor is it	Sign In

It's an "up-draft" carb such that you don't need a fuel pump even if it has one. YouTube thing didn't show but just the pic of the machine.

Those carbs you can almost redo with ordinary spare needle valve and fix any float issues like if it sank and make your own gaskets if needed.

If redoing this one all you are really doing is cleaning it out not much more. That and if you just smear silicone grease on the gaskets you can re-use them forever.

There will be an idle screw, mixture at idle screw and usually one for a power screw just gets the mixture correct. If specs unknown and bet unknown screw anything in and count the turns and put it back after cleaning right where it was.

Float level is the trick as no doubt brass hollow and they can sink and if so engine would flood out badly. It's just get any fuel out and AYOR with fuel solder the leak. They used to sell a product that made fuel not burn but haven't heard of it in about 45 years but they make it. Ask where a place would fix radiators, gas tanks if any around you.

Set float by holding needle valve and probably just get the fuel filled by a bottle in it and see where it shuts off incoming fuel which is likely about level for the float(s) as a unit. You'll know if it's too rich or lean by the smell of exhaust when warmed up if you have a good nose - not kidding,

T

(edit) Found pic of sample one and how simple if it stays showing.

Also carb. is spelled "carburetor" and your spell check will not correct you as it doesn't know how to spell it anyway

)

(This post was edited by Tom Greenleaf on Aug 18, 2014, 2:38 PM)

kev2
Veteran
kev2 profile image

Aug 18, 2014, 3:19 PM

Post #3 of 3 (1766 views)

Re: What kind of carburettor is it	Sign In

try GOOGLE search - oliver model 77 carburetor..........or TSX carburator

Email This Post

Search for (options) Privacy Sitemap