Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Weird Squeaking Noise


  Email This Post



ewidhelm
New User

Apr 21, 2010, 6:50 AM

Post #1 of 5 (3524 views)
Weird Squeaking Noise Sign In

1999 chevy silverado. 4x4, short box. 100,000 miles.

there is a squeaking noise that is coming from the back of the truck. it increases with speed. the faster i go backwards the more repetitions of the squeak you hear. it is only when i am backing up. if i put the truck in neutral and roll back it does not make the noise. it is only present when is in reverse gear. it is not the bed bolts either, as i have shaken the truck to see if it is that. give me a couple of ideas and if you know the relative cost of the fix that would be awesome too. thanks for the help.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 21, 2010, 7:24 AM

Post #2 of 5 (3521 views)
Re: Weird Squeaking Noise Sign In

First thing that comes to mind is a U-Joint. Some squeak, crackle or snapping sounds when going bad. May show rust as an indicator and no play yet. Would have to pull just that shaft (not real hard to do) out to check it fully.

Brakes are a maybe too. See if light pressure on brake while this happens changes the noise a lot. Worth checking back brakes now and then anyway too,

T



ewidhelm
New User

Apr 21, 2010, 7:41 AM

Post #3 of 5 (3517 views)
Re: Weird Squeaking Noise Sign In

its weird how it only does it when its in gear and going in reverse. could it have soemthing to do with that gear in particular.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 21, 2010, 10:09 AM

Post #4 of 5 (3512 views)
Re: Weird Squeaking Noise Sign In

Not sure - I'm not there listening? Know that the whole differential torques with loads upon it of acceleration and when doing so it's no longer a straight drive-shaft so the U-Joints make up for that. When in reverse it torques the other way and may, said MAY just be turning to a part of the needle bearing out of sight that are bad in that direction. Many U-Joints are fine until a load is on them as they wear into one spot and stay fine when always there.

They should always be perfect and some last forever - some don't?? Unseen it's polished surfaces and the needle bearings. They have a habit sometimes of making indentations in the cup and once they start to go they usually go fast. Water is another enemy of them. Don't drive with any bearings anywhere under water - they aren't made to take being submerged.

See if I can find a pic of a bad U-Joint inside.



That's a good pic if it shows. Those cups should be polished smooth and greasy not indented as shown. That one even indented the cross part - both act as "races" for the joint,

T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 21, 2010, 1:30 PM

Post #5 of 5 (3505 views)
Re: Weird Squeaking Noise Sign In

I think Tom is right about the u-joints. Examine them closely and look for any red powder seeping out of any of the cups. You have to look real close to see it.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap