|
|
Replacing head on toyota got question???
|
|
|
| |
|
|
rhinorex33
Novice
Sep 17, 2011, 7:40 AM
Post #1 of 7
(1410 views)
|
|
Replacing head on toyota got question???
|
Sign In
|
|
1994
Toyota
Corolla
1.8
167978
Have had the head checked out and was cut .10
First question....Do we need thicker washers on the head blots?
Second question....(On the back cam on passenger side is a half moon shaped alumium plug with a outer lip that sets flush to the top) Is it supost to be glued in ? and if so with what type of glue?
Third thing....the head bolts were not marked to which hole they came out of......what should we do about that?
Thanks for your response,
Rhinorex33
(This post was edited by rhinorex33 on Sep 17, 2011, 7:52 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 17, 2011, 8:07 AM
Post #2 of 7
(1388 views)
|
|
Re: Replacing head on toyota got question???
|
Sign In
|
|
Just reading the questions you are asking tells me you really should be having a professional do this.
What do the washers on the head bolts have to do with anything?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
rhinorex33
Novice
Sep 17, 2011, 8:11 AM
Post #3 of 7
(1385 views)
|
|
Re: Replacing head on toyota got question???
|
Sign In
|
|
the fact that the head has been cut .10 and I was not sure if the bolts would now be too long. As far as the pro doing this job would have like to been able to but did not have the funds so I am trying to do the best I can to see it through. Thank you for your reply
Rhinorex33
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 17, 2011, 8:20 AM
Post #4 of 7
(1379 views)
|
|
Re: Replacing head on toyota got question???
|
Sign In
|
|
I seriously doubt that they took a hundred thousands off that head.
The head bolts can't be re-used anyway. They have to be replaced. These are the kind of mistakes that will cause you to have a lot worse problem than you are starting with.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
rhinorex33
Novice
Sep 17, 2011, 8:26 AM
Post #5 of 7
(1375 views)
|
|
Re: Replacing head on toyota got question???
|
Sign In
|
|
 Sorry I did not mean to say hundred thousands.....Ten thousands .010 Thanks Hammer for the info I will start looking for more bolts. Did you happen to know about teh half moon plug on the back cam on the passenger side???
Rhinorex33
(This post was edited by rhinorex33 on Sep 17, 2011, 8:27 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 17, 2011, 8:53 AM
Post #6 of 7
(1364 views)
|
|
Re: Replacing head on toyota got question???
|
Sign In
|
|
It's just a valve cover seal. Only needs a little silicone at the ends where it butts up against something else.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
rhinorex33
Novice
Sep 17, 2011, 9:11 AM
Post #7 of 7
(1359 views)
|
|
Re: Replacing head on toyota got question???
|
Sign In
|
|
 Ok...Thanks for helping me out
Rhinorex33
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
