|
|
Removing Rivets to Replace parking Lens/Bulbs
|
|
|
| |
|
|
GMC dude
User
Jun 15, 2010, 2:29 AM
Post #1 of 10
(1547 views)
|
|
Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
Hw do you take the rivets off of the 1972 GMC 1500 lens on the (front) parking lights so you can change the bulb and replace worn amber lens with clear?
(This post was edited by GMC dude on Jun 15, 2010, 2:31 AM)
|
|
| |
|
|
chickenhouse
Enthusiast
Jun 15, 2010, 8:00 AM
Post #2 of 10
(1539 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
1972 should have phillips head screws. If rivited, someone has stripped the screw holes out.
|
|
| |
|
|
GMC dude
User
Jun 15, 2010, 7:55 PM
Post #3 of 10
(1531 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
Thanks for the reply, but the screws are the only parts that attach to the lower front of the truck; the rivets is what keeps the lens and housing unit together. This is for my 1972 GMC (parts for 67-72 GMC), NOT for a 71-72 Chevy! These parts are not interchangeable and are completely different. Sorry,m but ur answer is wrong. if it were Chevy parts then yes, ud be correct and then id be able to take it a part. They are completely different lens and diff parking lights. My question was how to remove the rivets... Thanks anyhow!
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jun 15, 2010, 8:19 PM
Post #4 of 10
(1530 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
CH is my older car, truck & best route thru a dry county expert I always defer to.
But to answer your rivet question. With any rivet there is 2 basic ways to remove them.
1. If you have the space, it to get a sharp chisel & cut the end off it.
2. If you don't have the room on either end, you drill the center out of it, pilot it with a small bit and then use one the size of the tube. Once that is drill out, both heads will fall off.....
|
|
| |
|
|
GMC dude
User
Jun 15, 2010, 9:14 PM
Post #5 of 10
(1526 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
Fantastic! Thank yo so much! I had no clue as to what to do.Couldnt pry it and from the looks of it, when it does come apart...cant reuse rivets, so i will definitely drill then out. Thanks again. 
|
|
| |
|
|
chickenhouse
Enthusiast
Jun 17, 2010, 7:29 PM
Post #6 of 10
(1515 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
OMG! Thanks Sidom! I made a MISTAKE! I did not know that Chevy & GMC did not share screws! Some had rivits! Sorry, guess I didn't do my homework. I apologise.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jun 17, 2010, 7:35 PM
Post #7 of 10
(1514 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
You know Ch I've never seen it factory either but I don't work on the older stuff.... Your range is way better than mine in that area...
Between the 2 of us we worked it out..... You're buying the 1st round....
|
|
| |
|
|
chickenhouse
Enthusiast
Jun 17, 2010, 7:45 PM
Post #8 of 10
(1510 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
Gotcha covered buddy, you name it- it's here!! Come take a 2 minute tour & see what I'm all about!! (Heh Heh- some may think it would only take 1 1/2 min to figure me out!)
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jun 17, 2010, 8:16 PM
Post #9 of 10
(1509 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
 
|
|
| |
|
|
GMC dude
User
Jun 19, 2010, 8:11 PM
Post #10 of 10
(1493 views)
|
|
Re: Removing Rivets to Replace parking Lens/Bulbs
|
Sign In
|
|
Actually it was I... GMC dude whom shedded the light. Thanks guys! LOL 
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
Howdy
