|
|
Re: 2000 Chevy Malibu will not turn to lock position
|
|
|
| |
|
Syris
New User
Oct 6, 2010, 11:54 AM
Post #1 of 1
(1816 views)
|
Re: 2000 Chevy Malibu will not turn to lock position
|
Sign In
|
|
I am having trouble where the key is not releasing from the ignition, the key will not fully turn to the off position. I tried the black buttons on the Automatic Transmission cause it would stick in the past, but that didn't seem to work, I actually took the handle off and depressed the red stem down from the post on the transmission thinking that might be the problem. so currently I have my car in the garage with the negative terminal unhooked as to not drain my battery. any other suggestion??? Update: removed Ignition Switch from Dash, as soon as I unplugged the Cable from the back of the assembly, the ignition switch released the key and appeared to work normally. When I reinserted the cable into the switch assembly and engaged the key it locked up again.
(This post was edited by Syris on Oct 7, 2010, 12:03 PM)
|
|
| |
|