Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Propotioning brake valve leaking


  Email This Post



mec4vic
User

Dec 3, 2012, 7:06 PM

Post #1 of 3 (1586 views)
Propotioning brake valve leaking Sign In

HI,
I have a 1995 Honda Civic EX 1.6L V-tec with 350,200 miles. I had a proportioning brake valve leaking when I extended the push rod a little thinking that I could brake a bit higher in position. I was told that that provoked that problem so I positioned it back. I had the proportioning valve repair and after about six month the valve is leaking again. Is it possible that the rod is not fully back in position or is the valve defective that has been worn and can not be repair?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 3, 2012, 8:34 PM

Post #2 of 3 (1574 views)
Re: Propotioning brake valve leaking Sign In

What you did will cause the brakes to build up and hold pressure and eventually not release but it will not cause leaks in a proportioning valve or anything else. I would be blaming the 350,000 miles instead.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Smogguy83
User

Dec 4, 2012, 1:01 AM

Post #3 of 3 (1554 views)
Re: Propotioning brake valve leaking Sign In

I would say check your threads on the lines that goes in. Pay attention and I bet its the line. Prob stripped cross threaded.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap