Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Power Steering Pump Rebuild


  Email This Post



MarineGrunt
Enthusiast
MarineGrunt profile image

Dec 4, 2012, 11:20 AM

Post #1 of 6 (1950 views)
Power Steering Pump Rebuild Sign In

I decided to replace the seals in the power steering pump in the 2002 Chevy Venture. It had a leak and I thought it was the hoses. I had to unbolt the pump in order to change the hoses. I decided to pull off the fitting that connects to the hard line and check out the o-ring. It was junk so I think that's where the main leak was coming from. So, I picked up a seal kit for $10. I took the ring off of the back cover plate but can't get the cover plate off. It says to just tap the housing with a mallet. There's not really a lip or anything that I can get a hold of to pry it out. Are there any tricks to getting it off? I really want to replace the shaft seal. If I can't get the cover off could I pry the seal out from the front? I'd like to replace the rear cover's o-ring so I'm really hoping I can get it off.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 4, 2012, 11:29 AM

Post #2 of 6 (1939 views)
Re: Power Steering Pump Rebuild Sign In

I don't know if that it is serviceable in the field.
Here's what they show as serviceable.





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



MarineGrunt
Enthusiast
MarineGrunt profile image

Dec 4, 2012, 11:30 AM

Post #3 of 6 (1937 views)
Re: Power Steering Pump Rebuild Sign In

Um...never mind.....I tapped on the shaft and it came off, along with everything else like all of the little vanes. Hope I can get the sob back together right! Any diagrams for me?


MarineGrunt
Enthusiast
MarineGrunt profile image

Dec 4, 2012, 11:36 AM

Post #4 of 6 (1934 views)
Re: Power Steering Pump Rebuild Sign In

Thanks HT. The inside of the pump is kind of like the tranny pump. After working on that I'm 95% sure I can get this back together. There's not really much too it. Except for the little vanes, it fell on the workbench exactly how it came out. I'll think we'll be okay.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 4, 2012, 12:34 PM

Post #5 of 6 (1902 views)
Re: Power Steering Pump Rebuild Sign In

I gave you the only one Alldata had.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



MarineGrunt
Enthusiast
MarineGrunt profile image

Dec 4, 2012, 2:39 PM

Post #6 of 6 (1893 views)
Re: Power Steering Pump Rebuild Sign In

Thanks HT. I was able to get it all back together. With the new seal and O-rings hopefully it will be as good as new. I think the pump was fine except for the one leaky o-ring. I just didn't want to get it all back together only to find out it was leaking somewhere else. For $10 I figured why not.

I just finished getting the new lines hooked up. I sure wish I would've done that before the tranny was back in. I didn't realize one was leaking though. They were kind of a pain. Heck, this van may last us another 143k by the time we're done with it.

Like always, your help is always appreciated.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap