|
|
Please help lost on a cts
|
|
|
| |
|
|
andrew03cts
New User
Jul 19, 2012, 7:37 PM
Post #1 of 7
(2008 views)
|
|
Please help lost on a cts
|
Sign In
|
|
I have a 03 cadillac cts 3.2 and i have a 02 sensor problem. I have swapped bank 1 and bank 2 and same problem bank 2 gets high voltage with 1 sensor .6 to 1.08 short term fuel trim is -25 and swap sensors and it will get no activity .440 short term fuel trim 0.0 but both sensors read right on bank 1 only have a problem with bank 2 wiring is good also swapped the injectors thinking maybe leaking but still the same
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 20, 2012, 3:12 AM
Post #2 of 7
(1966 views)
|
|
Re: Please help lost on a cts
|
Sign In
|
|
OK, back up. What is the exact code number you are getting before and after you did your swapping?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
andrew03cts
New User
Jul 20, 2012, 8:20 AM
Post #3 of 7
(1954 views)
|
|
Re: Please help lost on a cts
|
Sign In
|
|
p0152 with 1 sensor and p0154 p0050 p0155 with the other sensor both sensors read perfect in bank 1
(This post was edited by andrew03cts on Jul 20, 2012, 8:27 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 20, 2012, 8:51 AM
Post #4 of 7
(1945 views)
|
|
Re: Please help lost on a cts
|
Sign In
|
|
You're showing a short to power and a heater issue. The circuit will have to be troubleshooted thoroughly. It could be a wiring problem, shorted sensor or bad PCM.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
andrew03cts
New User
Jul 20, 2012, 9:09 AM
Post #5 of 7
(1941 views)
|
|
Re: Please help lost on a cts
|
Sign In
|
|
I also unplugged the harness side of the 02 and both read the same volts with a volt meter when i got the car the 02 wire and crankshaft position sensor were burnt so replace the sensor and rewire the 02 soldered it and every thing. why would 1 sensor say high voltage and not get the heater codes
(This post was edited by andrew03cts on Jul 20, 2012, 9:16 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 20, 2012, 9:27 AM
Post #6 of 7
(1932 views)
|
|
Re: Please help lost on a cts
|
Sign In
|
|
What's one have to do with the other?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
andrew03cts
New User
Jul 20, 2012, 9:33 AM
Post #7 of 7
(1922 views)
|
|
Re: Please help lost on a cts
|
Sign In
|
|
Should both plug have the same voltage when the 02 sensors are unplugged
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
((BRAZIL)) SSD CHEMICAL SOLUTION UK+27672716140
2011 Dodge Nitro OBD scanner seems to drain battery in 10-20 minutes
Grounding Cable, 2017 Jeep Renegade Trailhawk
equipment
