Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Locking wheel nut removal


  Email This Post



trollied
New User

Feb 27, 2010, 2:23 PM

Post #1 of 4 (1406 views)
Locking wheel nut removal Sign In

I had my car serviced back in september 2009 and also had two new tyres fitted at a local garage. Today I went over to kwik fit to replace my near side front only to be told that the locking wheel nut had been tightened so much that they were not prepared to carry on with the work as they said that theres a good chance of the locking wheel nut being disformed and therefore unable to remove the rest oif the wheels. If I was to go to the garage that fitted the tyres, are they responsable and if so is the work to remove wheel chargable? Thanks


re-tired
Veteran / Moderator
re-tired profile image

Feb 27, 2010, 10:06 PM

Post #2 of 4 (1400 views)
Re: Locking wheel nut removal Sign In

If you had gone back within a week or two the shop probably would have taken care of it. But too much time and the chance of other people handling the car has gone by. Somebody somewhere is going to have to take the lock off .And who ever does is not going to "eat it". Most shops have a commercial lock nut removal kit . Unfortunetly it beats the lock up pretty good.Better to bite the bullet BEFORE you have a flat on the highway and have to toss in a tow bill to boot.BTW it would be a wise thing to have the other wheels checked at this time.


LIFE'S SHORT GO FISH


nickwarner
Veteran / Moderator
nickwarner profile image

Feb 28, 2010, 8:31 PM

Post #3 of 4 (1390 views)
Re: Locking wheel nut removal Sign In

Unless you are running a very expensive rim and park it in a higher crime area, I would get rid of the locking nuts. Your post didn't say what kind of car or rims you have, but I get cars all the time with factory rims that have a locknut on each rim and they haven't got the lock tool. Unlike a normal nut, they get torn up easily when too tight. Like re-tired said, we have the sockets that will get it off but the nut is usually if not always rendered useless after using them.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Mar 1, 2010, 6:32 AM

Post #4 of 4 (1386 views)
Re: Locking wheel nut removal Sign In

As nick suggested - get rid of all the locking wheel nuts. They are more a hassle for you than a good thief! The high end Snap-On kit can remove those faster than you can find your tire iron so determined thieves will have them and be gone. If the type that's a round nut with a funky unique indented shape like a clover leaf - those are not strong if nut is sticky, rusting on and more trouble for the owner than the thief as said,

T







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap