|
|
How do you remove 96 Toyota Tercel door panel
|
|
|
| |
|
|
jjrjjr2
New User
Aug 1, 2006, 8:00 AM
Post #1 of 2
(9959 views)
|
|
How do you remove 96 Toyota Tercel door panel
|
Sign In
|
|
I need to know how to remove the drivers side door panel in a 96 Toyota
Tercel 2 door. I can see how to pull out the plastic rods that hold it
in place, but I am having a problem with the inside door latch and the
knob and arm that raises an lowers the window. Do you need special
tools to remove these?
|
|
| |
|
|
frankiev
Anonymous Poster
frank.valentin@gmail.com
Oct 30, 2006, 8:19 AM
Post #2 of 2
(9874 views)
|
Re: How do you remove 96 Toyota Tercel door panel
|
Sign In
|
|
If you are still trying to find out how to remove inside door panel for '96 Toyota Tercel, I just went through the very same process on a '95 Toyota Tercel. I took pictures, and can send them to you, if you are interested. The steps are as follows:
1. Remove window crank (it has a kind of 'bent wire' c-clamp, which holds it onto the window crank shaft).
2. Pry upwards the top plastic cover to the arm rest (this is a plastic coated foam rubber piece, on which you rest your arm).
3. Remover the two now visible screws which fasten the arm rest onto the door.
4. Remove the one screw fastening the inside door handle.
5. With a blunt tool, gently hit the inside door handle in a forward direction (towards the door hinge). This will release the door handle from the door.
6. Pry between the door panel and the door, to unsnap the snaps holding the door panel in place.
7. Finally, lift door panel out and up to remove it from door.
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 