|
|
Help i think i pressed my ball joint too hard
|
|
|
| |
|
MacNight
New User
Oct 14, 2016, 4:50 PM
Post #1 of 2
(1166 views)
|
Help i think i pressed my ball joint too hard
|
Sign In
|
|
Hello guys , i've been pressing my ball joint in and out on one side without problem , but today i decided to do the other side everything went ok with the fork kit to remove it . then i used a press kit to put it back but....thats where once finish i noticed that i had bent the metal cap on the ball joint here's a normal ball joint picture and i also joined my famous new pressed ball joint that has bent a little bit on the cap :/ i hope its not too bad..... My car is a : Kia Rio5 2009 EX Sport 1.6L 16Valve This is a brand new ball joint that look like the one i installed on the right side [url=https://postimg.org/image/dx8sg4jzz/][url=https://postimage.org/index.php?lang=french]des photos And this is the newest ball joint i pressed a lil bit too hard on the left side the metal cap bent a lil bit :/ like if someone had swollen skin after wasp bite [url=https://postimg.org/image/gvmxyqm57/][url=https://postimage.org/index.php?lang=french]Télécharger des photos i'd like help toward this problem thanks alots guys.
(This post was edited by MacNight on Oct 14, 2016, 4:55 PM)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 14, 2016, 8:12 PM
Post #2 of 2
(1146 views)
|
Re: Help i think i pressed my ball joint too hard
|
Sign In
|
|
A dent in the cap is no big deal. All it does it hold in grease. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|