|
|
rgsalisbury
New User
Aug 8, 2010, 6:51 PM
Post #1 of 2
(1322 views)
|
I have a 2000 gmc sonoma blower motor works only on high. Is there a part I can replace to correct this??
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 8, 2010, 6:54 PM
Post #2 of 2
(1320 views)
|
Yes, replace the blower motor resister. It's located next to the blower motor.
This is for the C45 system. the C60 is slightly different
REMOVAL PROCEDURE
- Disconnect the electrical connector (3).
- Remove the blower motor resistor mounting screws (1).
- Remove the blower motor resistor (2) from the blower case.
INSTALLATION PROCEDURE
- Install the blower motor resistor (2) to the blower case. NOTE: Refer to Fastener Notice in Service Precautions.
- Install the blower motor resistor mounting screws (1). Tighten Tighten the screws to 1.9 N.m (17 lb in) .
- Connect the electrical connector (3).
- Perform the heater function test. Refer to Function Test.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 