Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

Bars on new rotors


  Email This Post



Mijeelan
User

Apr 8, 2020, 6:01 AM

Post #1 of 6 (1552 views)
Bars on new rotors Sign In

2013 Dodge Avenger SE

Yesterday I changed out all the pads and rotors on my vehicle.. this morning when looking at them I noticed 2 bars? On the rear driver side rotor.

The rear passenger rotor looks fine and as far as I can tell, the 2 front look fine.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 8, 2020, 7:29 AM

Post #2 of 6 (1542 views)
Re: Bars on new rotors Sign In

The surfaces of the new pads are not perfectly flat and will wear off the high spots, assuming they were installed correctly. You should double check that.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Mijeelan
User

Apr 8, 2020, 7:33 AM

Post #3 of 6 (1536 views)
Re: Bars on new rotors Sign In

I'll check it out tonight


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 8, 2020, 7:37 AM

Post #4 of 6 (1532 views)
Re: Bars on new rotors Sign In

If you want to hurry up the process you can remove the pad and rub it in a circular motion on flat concrete.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Mijeelan
User

Apr 8, 2020, 7:39 AM

Post #5 of 6 (1526 views)
Re: Bars on new rotors Sign In

I'll try that. Thanks.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 8, 2020, 8:23 AM

Post #6 of 6 (1522 views)
Re: Bars on new rotors Sign In

? Just ONE did that? Not sure but a maybe is something was on a rotor or pad you didn't notice making a colored streak(s) ?? I personally like to clean new rotors unknown what is on them to halt rust in storage, shipping and some brake items carefully "shrink wrapped" if a bit or two of that plastic got burned in it might clean off with I like brand name BraKleen just totally avoid that on anything but that parts! It will quickly ruin paint, rubber, plastic coatings - strong stuff and meant to be,


T







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap